Download USER GUIDE - HydroAsia

Transcript
DATA SELECTION TECHNIQUES IN GRAPHICAL WINDOWS
Figure 3.9 Options dialog showing symbols and fonts settings.
Here you control the appearance of the node labels, select fonts for the axis and labels, and
checked/uncheck the ‘Collapse node’ toggle.
3.5
Zooming and Scrolling
The Zoom and Scroll facilities enable focusing on the network details in a Horizontal Plan View or
in a Longitudinal Profile view. The four Zoom facilities (‘Zoom In’, ‘Zoom Out’, ‘Previous Zoom’
and “Zoom to Model Extent”) are accessed through the main menu “View”, through the local
menus, or by the buttons on the toolbar.
The ‘Zoom In’ function works in two modes. After the activation of the ‘Zoom In’ function, the
cursor changes shape, indicating that the ‘Zoom In’ function is active. A repeated clicking on the left
mouse button causes a step-wise zooming, with the location pointed by the cursor put in the centre
of the horizontal plot window. The ‘Zoom In’ mode can be terminated by <Esc> key. If the left
mouse button is held down, the ‘Zoom In’ works as a click-and-drag feature. A rectangle around the
desired sector of the presently displayed view is drawn by dragging the cursor inside the view area.
When a desired area is bounded inside the rectangle, the mouse button is released and a zoomed-in
view is automatically displayed. After this operation, the program automatically returns to the
‘standard’ mode.
A reverse operation is achieved by the ‘Zoom Out’ function. Each time this function is activated,
the displayed area is enlarged in uniform steps.
The “Previous Zoom” restores the foregoing view. The “Zoom to Model Extent” zooms-out or
zooms-in in one step, resulting in a view of the entire model area. Repeatedly use of “Zoom to
Model Extent” will stepwise zoom beyond the full extend. When either of the other zoom functions
is used the “Zoom to Model Extend” resumes its original facility.
While in a zoomed view, showing only a portion of the model area, scrollbars enable scrolling
through the view. The scrolling can be done continuously by dragging the scroll slides, in large steps
by clicking on the scroll bar at the desired side of a scroll slide, or in small steps by clicking on the
scroll arrows in the desired direction.
See also section “Axes” where Zoom Tracking function is described.
3.6
Printing and Copying Graphics
All graphics (Horizontal Plan View, Longitudinal Profile view, Time Series Graphs, Cross section
graphs) can be copied to the Windows clipboard. Make the desired window active and select the
“Copy Graphics” button. The graphics may be pasted into most Windows graphics and reporting
applications. The graphical object is a vector-based set (Enhanced Windows Metafile) and can thus
be edited (e.g. adding annotation, changing colours, etc). Instead of transferring the graphics directly
to some running application, it can be saved as a meta-file (*.EMF) for later use.
DHI Software
73