Download IVC-3D Operating Instructions

Please read the complete manual before attempting to operate your IVC-3D.
WARNING
This product is equipped with a Class 2M laser according to EC 60825-1 or Class II according to
21 CFR 1040.10 / 11 (CDRH), respectively.
Class 2M lasers emit visible radiation in the
wavelength range from 400 nm to 700 nm where
eye protection is normally afforded by aversion
responses including the blink reflex. However,
viewing of the output is hazardous if the user
employs optical instruments within the beam or
suppresses the blink reflex intentionally.
LASER RADIATION – DO NOT STARE INTO BEAM
OR VIEW DIRECTLY WITH OPTICAL INSTRUMENTS
CLASS 2M LASER PRODUCT
according to IEC 60825-1 : 2001-8
•
Do not stare into beam.
•
Do not view the laser beam directly with optical
instruments like magnifying glasses, telescopes, etc.
The IVC-3D is a laser product and operation using
procedures other than those specified herein may
result in hazardous radiation exposure.
Do not open the IVC-3D
The IVC-3D unit should not be opened, the IVC-3D contains no user serviceable parts inside. Opening the IVC-3D
unit may result in hazardous radiation exposure.
Turn off the power to the IVC-3D before maintenance
The power to the IVC-3D must be turned off before any maintenance is performed. Failure to turn this power off
when maintaining the unit may result in hazardous radiation exposure.
ISM Radio Frequency Classification - EN55011 –
Group1, Class A
Warning:
Class A equipment is intended for use in an industrial environment. There may be potential difficulties in ensuring electromagnetic compatibility in other environments, due to conducted as well as radiated disturbances.
Explanations:
Group1 – ISM equipment (ISM = Industrial, Scientific and Medical)
Group 1 contains all ISM equipment in which there is intentionally generated and/or used conductively coupled
radio-frequency energy which is necessary for the internal functioning of the equipment itself.
Class A equipment is equipment suitable for use in all establishments other than domestic and those directly
connected to a low voltage power supply network which supplies buildings used for domestic purposes.
Class A equipment shall meet class A limits.
Note: Although class A limits have been derived for industrial and commercial establishments, administrations
may allow, with whatever additional measures are necessary, the installation and use of class A ISM equipment
in a domestic establishment or in an establishment connected directly to domestic electricity power supplies.
Please read and follow ALL Warning statements throughout this manual.
German versions of the Operating Instructions and Reference manual are available on the CD.
Eine deutsche Version der Bedienungsanleitung und des Referenzhandbuchs finden Sie auf der
beigelegten CD.
© SICK IVP 2006-11-24
All rights reserved
8011007
Subject to change without prior notice.