Download isadora-v11

• You can stop mirroring to the external device by choosing Output > Stop
External Video Out.
Note that the External Video Out feature only mirrors the output of the stage. No
images will be sent to the camera if the stage is not visible.
MIDI Input and Output
Isadora has a full complement of actors that allow for interactive control via MIDI.
But before you use the actors, you must configure Isadora for MIDI Input and
Output.
Hardware Interface & Drivers
Before you begin, you must have a hardware MIDI interface that allows you to
connect MIDI devices to your computer. Before using this device with Isadora, you
must install the hardware drivers for the interface. To do this, please follow the
installation instructions in the interface’s manual. Note: Isadora should not be
running when you install the drivers, otherwise it may not see the interface.
After you’ve installed any required drivers, you should connect the MIDI interface
to your computer. These interfaces are most often connected to a USB port with a
standard USB cable. Once you’ve done this, you’re ready to start up Isadora.
Midi Setup
Ensure that your hardware MIDI interface is connected to your computer. Then start
Isadora and choose Windows > Midi Setup. A dialog will appear that looks like
this:
This window determines how the physical inputs on your MIDI interface will be
associated with Isadora’s MIDI input and output ports.
For sake of clarity, we will refer in this document to the MIDI ports on your MIDI
interface as Physical ports to differentiate them from Isadora’s MIDI Input and
Output Ports.
Isadora Manual
136