Download Watson TSQ Module 1.0 User Guide Version A

Transcript
Glossary:
indexed database A database created with the
Database Manager or the FASTA Database Indexer
to speed up searches.
individual Specifies the number of results files
available for each sample. One results file is created
for each individual sample in the analytical run.
initial temperature The temperature of the oven or
injector to be applied as soon as the GC receives the
Start signal.
injection status, autosampler status Indicates
whether or not the current sample has or has not
been injected.
injection volume The actual volume in microliters
(μL) of a sample injected by the autosampler into the
chromatograph. The minimum and maximum
injection volumes that you can use depend on the
autosampler you selected.
input parameter files Text files that store the settings
used in dialog boxes. Whereas most of the settings in
the input parameters files can be changed in the dialog
boxes within the BioWorks Browser, some can be
changed only by altering the contents of the input
parameters file in a text editor.
instrument Set of physical items that comprise an
LC/MS system.
instrument configuration A set of user-defined
hardware and software options. Xcalibur provides
configuration options for the following: mass
spectrometer, fonts, HPLC, autosampler, inlet,
analog inputs, and Ethernet.
instrument method A set of experiment parameters
that define Xcalibur operating settings for the
autosampler, liquid chromatograph (LC), mass
spectrometer, divert valve, syringe pump, and so on.
Instrument methods are saved as file type .meth.
insulin_ms.raw The raw spectrum of insulin that is
provided with the BioWorks Browser program.
intensity relative to base peak The ratio of intensity
of a particular peak in a mass spectrum to the
intensity of the mass peak of the greatest intensity.
This ratio is generally equated to the normalized
ratio of the heights of the respective peaks in the mass
spectrum, with the height of the base peak being
taken as 100.
Interactive Chemical Information System (ICIS™)
The computer software used by the Finnigan™ XSQ
product line when running in a UNIX environment.
You can use data obtained with ICIS software with
Xcalibur. ICIS files have the .dat extension.
internal standard (ISTD) A component added to a
sample to correct for injection errors and sample
preparation errors. It is assumed that the ratio of the
target compound to the internal standard compound
is constant for a given calibration standard. The
concentration or amount of an internal standard in
any solution used in quantitation remains constant.
See also:
Extensible Markup Language
internal standard (ISTD) calibration
internal standard (ISTD) response ratio
target compound
internal standard (ISTD) calibration A calibration
where known amounts of standard components are
added to the sample to be analyzed.
See also:
external standard calibration
internal standard (ISTD) response ratio The ratio of
the signal response of an unknown peak to the
response of the corresponding internal calibration
peak at a specified calibration level.
interstitial volume, LC Another name for void
volume. The total volume of mobile phase within the
length of the LC column. The void volume consists
of the intraparticle volume (inside the packing
material itself ) and interparticle volume (between the
packing particles). The remainder of the volume of
the column consists of the packing material.
in vivo In the living body of a plant or an animal.
130
Watson TSQ Module User Guide
Thermo Scientific