Download Watson TSQ Module 1.0 User Guide Version A
Transcript
Glossary: indexed database A database created with the Database Manager or the FASTA Database Indexer to speed up searches. individual Specifies the number of results files available for each sample. One results file is created for each individual sample in the analytical run. initial temperature The temperature of the oven or injector to be applied as soon as the GC receives the Start signal. injection status, autosampler status Indicates whether or not the current sample has or has not been injected. injection volume The actual volume in microliters (μL) of a sample injected by the autosampler into the chromatograph. The minimum and maximum injection volumes that you can use depend on the autosampler you selected. input parameter files Text files that store the settings used in dialog boxes. Whereas most of the settings in the input parameters files can be changed in the dialog boxes within the BioWorks Browser, some can be changed only by altering the contents of the input parameters file in a text editor. instrument Set of physical items that comprise an LC/MS system. instrument configuration A set of user-defined hardware and software options. Xcalibur provides configuration options for the following: mass spectrometer, fonts, HPLC, autosampler, inlet, analog inputs, and Ethernet. instrument method A set of experiment parameters that define Xcalibur operating settings for the autosampler, liquid chromatograph (LC), mass spectrometer, divert valve, syringe pump, and so on. Instrument methods are saved as file type .meth. insulin_ms.raw The raw spectrum of insulin that is provided with the BioWorks Browser program. intensity relative to base peak The ratio of intensity of a particular peak in a mass spectrum to the intensity of the mass peak of the greatest intensity. This ratio is generally equated to the normalized ratio of the heights of the respective peaks in the mass spectrum, with the height of the base peak being taken as 100. Interactive Chemical Information System (ICIS™) The computer software used by the Finnigan™ XSQ product line when running in a UNIX environment. You can use data obtained with ICIS software with Xcalibur. ICIS files have the .dat extension. internal standard (ISTD) A component added to a sample to correct for injection errors and sample preparation errors. It is assumed that the ratio of the target compound to the internal standard compound is constant for a given calibration standard. The concentration or amount of an internal standard in any solution used in quantitation remains constant. See also: Extensible Markup Language internal standard (ISTD) calibration internal standard (ISTD) response ratio target compound internal standard (ISTD) calibration A calibration where known amounts of standard components are added to the sample to be analyzed. See also: external standard calibration internal standard (ISTD) response ratio The ratio of the signal response of an unknown peak to the response of the corresponding internal calibration peak at a specified calibration level. interstitial volume, LC Another name for void volume. The total volume of mobile phase within the length of the LC column. The void volume consists of the intraparticle volume (inside the packing material itself ) and interparticle volume (between the packing particles). The remainder of the volume of the column consists of the packing material. in vivo In the living body of a plant or an animal. 130 Watson TSQ Module User Guide Thermo Scientific