1
Download IWS v7.1 User Guide and Technical Reference
Transcript
Appendix: Built-in Scripting Language FTP functions These functions are used to configure the FTP settings for the project, as well as to get files from and put files on a remote server. CnfFTP This function configures the FTP settings used by other features in the project that can transfer files, such the FTPGet and FTPPut functions. Function Group Execution Windows Embedded Thin Client CnfFTP FTP Synchronous Supported Supported Supported Syntax CnfFTP( strServer, optStrUser, optStrPwn, optNumPassiveMode, optNumPort ) strServer The address of the FTP server. optStrUser The username for the FTP account. This parameter is optional; if no value is given, then the username "anonymous" is used by default. optStrPwd The password for the FTP account. This parameter is optional; if no value is given, then the password is left blank. optNumPassiveMode A numeric flag that specifies whether Passive FTP mode is enabled. (Passive FTP can be used to bypass some firewall configurations.) Value Description 0 Passive FTP mode is disabled (default). 1 Passive FTP mode is enabled. This parameter is optional; if no value is given, then default value is 0. optNumPort The TCP/IP port number. This parameter is optional; if no value is given, then port 21 is used by default. Returned value Value 0 Description Success −1 Invalid number of parameters −2 Invalid server name −3 Invalid user name Note: This function does not actually connect to the server, so these error codes do not show the quality of the connection. They only show whether the FTP settings have been successfully configured. Page 694 InduSoft Web Studio
