Download Operating Instructions TEMP-Soft

PSG Plastic Service GmbH
Operating Instructions TEMP-Soft
Output
Selecting function
For some input, as well as output functions, additional information must be entered. Please activate these by
tapping on the entry field below the function selection. A relevant entry mask appears, in which the required
information can be entered.
Direct or time-delayed output
In addition to the action, it can be stipulated whether the information should be output directly or
time-delayed. In case of time-delayed output, the delay period is to be entered in minutes in the
entry field.
Storing or not storing
It can be adjusted whether the function is storing or non-storing. A storing function remains
visible on the display also in the case where the condition of the entry function is no longer
valid. Thus e.g. certain process states in the temperature control system of the hot runner can
also still be subsequently tracked and observed.
In case of in- and/or output is set storing, it can be acknowledged by this menu key, i.e. the
storing is released.
User function with 2 conditions
On leaving the menu without previous storage, a request is implemented as to whether the changes should
be accepted.
Right to technical changes reserved
Rev. 2.05.01
133