Download Operating Instructions TEMP-Soft

PSG Plastic Service GmbH
Operating Instructions TEMP-Soft
10.3.4 Tool coding (optional function)
If the control cabinet has the tool coding option, a coding information of the tool TEMP-Soft is
communicated over the 8 entries on a plug.
For every coding, one recipe can be stored, whose settings are accepted in case of active tool
coding (activation/deactivation, see Chapter 10.5.6.4).
The tool coding is active if the display (010) can be seen in the menu bar.
Recipe allocation Tool coding
After selection of any arbitrary
location in a line, the dialog for
the recipe selection is opened
Right to technical changes reserved
Rev. 2.05.01
93