Download Operating Instructions TEMP-Soft

86
Chapter 10
Menus
10.3.3.6 Parameters
In order to enable convenient operation of the configuration data, this is collated into functional
groups in registers.
The following registers are existing:
• Status
• Temperature Setpoint Value
• Limit Values
• Heating Current Monitoring
• Functions
• Regulation 1
• Timer
Processing off-line configuration
parameters
Keys for the zone selection (one for every zone) are listed in the lower screen section. In case of many
zones with comprehensive control systems, this key is possibly too small for convenient operation using
Touch-Screen. For this, please select the ZOOM key in the menu bar. The registers in the upper screen
area are faded out and the entire screen page is used for the keys for the zone selection.
Zone display in parameter
display
For changes and re-entry, zones must be selected (see Chapter 6.1.2).
Right to technical changes reserved
Rev. 2.05.01