Download HP 100BaseT Reference Guide

HP 100Base-T Hubs Installation and Reference Guide
List of Figures
Figure 2.1
Figure 2.2
Figure 3.1
Figure 3.2
Stacking Hubs without a Rack
Mounting Hubs Using a Mounting Rack
Attaching All Hubs to the Stack Collision Domain
Linking Part of the Stack to the Stack Collision
Domain with Straight-through, Category 5
Twisted-pair Cable
Figure 3.3 Stacking Isolated Hubs with Straight-through,
Category 5 Twisted-pair Cable
Figure 3.4 Linking Stacked Hubs to Standalone Hubs via
Stacking Cable and Cascaded Connections with
Straight-through, Category 5 Twisted-pair Cable
Figure 3.5 Linking Stacked Hubs to a Network Management
Station
Figure 3.6 Linking Isolated Collision Domains in a Stacked
System
Figure 3.7 Connecting Remote Stacks using Switch Port
Modules
Figure 3.8 Connecting to the Extended Network
Figure 4.1 Main Configuration Menu (Hub-24TX only)
Figure 4.2 Main Configuration Menu (Hub-12TX only)
Figure 4.3 Configuration Menu for Switch Port Module (Hub12TX only)
Figure 4.4 Main Configuration Menu
Figure 4.5 System Information Menu
Figure 4.6 System Configuration Menu
Figure 4.7 Network Configuration Menu
Figure 4.8 SNMP Configuration Menu
Figure 4.9 SNMP Communities Menu
Figure 4.10 IP Trap Receivers Menu
Figure 4.11 IPX Trap Receivers Menu
Figure 4.12 Hub Configuration: Hub Selection Menu
Figure 4.13 Hub Configuration Menu
Figure 4.14 Hub ID Configuration Menu
Figure 4.15 Port Configuration: Port Selection Menu
Figure 4.16 Port Configuration Menu
Figure 4.17 Exp Slot Port Configuration Menu
xvi
Contents
2-2
2-3
3-5
3-6
3-7
3-8
3-9
3-10
3-11
3-12
4-8
4-9
4-10
4-11
4-12
4-13
4-14
4-16
4-17
4-18
4-19
4-20
4-21
4-22
4-23
4-24
4-25