Download HP 100BaseT Reference Guide
Transcript
HP 100Base-T Hubs Installation and Reference Guide Extending the Network with Alternate Connections You can extend your network by connecting any of the hubs in a stacked system to other compatible hubs via the Switch Port Module. In the diagram below, a standalone hub is connected to hub 3 in the stacked system using the Switch Port Module. However, remember that the Hub-12TXM agent can only manage hubs connected to it through the Stacking Cable. Figure 3.4 Linking Stacked Hubs to Standalone Hubs via Stacking Cable and Cascaded Connections with Straight-through, Category 5 Twisted-pair Cable 3-8 Setting Up Network Connections