Download HP 382 User's Manual

Positioning the Cursor
The most commonly-used method to move the cursor is to use the h, j, k, and
l keys. You can also use the arrow keys. These keys move the cursor as follows
(press 4ESC5 rst for command mode):
Table 4-2.
To Do This . . .
Type This Command . . .
Move the cursor right.
l or
475
Move the cursor left.
h or
465
Move the cursor up.
k or
485
Move the cursor down.
j or
495
4
Saving Your Work and Quitting
You can save your work with or without quitting vi. Your document must be
in command mode for you to be able to use the following commands to save
your work. Press 4ESC5 to ensure that your document is in command mode:
Table 4-3.
Type This Command . . .
To Do This . . .
Save without quitting vi
:w
Save and quit vi
:wq
Quit vi without saving changes
:q!
Save under another le name
:w lename
Save in an existing le and overwrite that le
:w! lename
Using the Command Line
FINAL TRIM SIZE : 7.5 in x 9.0 in
4-15