1
Download Fujitsu XG2000 User's Manual
Transcript
XG2000 series User's Guide Message ID Severity S2217 WARNING S2218 WARNING S2219 WARNING S2220 WARNING S2221 WARNING S2222 WARNING S2223 WARNING S2224 WARNING S2225 WARNING Message/Explanation/Solution Too Many Input Queue Tag Memory SBE Errors. LOG Disabled. Explanation A correctable error was repeatedly detected in the switch chip. Logging for this event is disabled. Solution Note the message contents and contact the sales representative. MAC address learning failed. Explanation Failed to learn the MAC address. Solution Delete the unused static MAC address. Since MAC addresses are managed with a hashing algorithm, a message stating the address cannot be registered may be displayed even though the number of addresses registered is less than the number that can be registered. If the message is displayed even though no static MAC address is unregistered, note the message contents and contact the sales representative. Drop Queue SBE detected. %1$ Explanation A correctable error was detected in the switch chip. It is automatically corrected by hardware. z [[Inserted string]]%1$: Supplementary code for the error Solution If the same message reappears after restarting the switch, note the message contents and contact the sales representative. Too Many Drop Queue SBE Errors. LOG Disabled. Explanation A correctable error was repeatedly detected in the switch chip. Logging for this event is disabled. Solution Note the message contents and contact the sales representative. MAC Table SBE detected. %1$ Explanation A correctable error was detected in the switch chip. It is automatically corrected by hardware. z [[Inserted string]]%1$: Supplementary code for the error Solution If the same message reappears after restarting the switch, note the message contents and contact the sales representative. Too Many MAC Table SBE Error. LOG Disabled. Explanation A correctable error was repeatedly detected in the switch chip. Logging for this event is disabled. Solution Note the message contents and contact the sales representative. Multicast State Table SBE detected. %1$ Explanation A correctable error was detected in the switch chip. It is automatically corrected by hardware. z [[Inserted string]]%1$: Supplementary code for the error Solution If the same message reappears after restarting the switch, note the message contents and contact the sales representative. Too Many MST SBE Errors. LOG Disabled. Explanation A correctable error was repeatedly detected in the switch chip. Logging for this event is disabled. Solution Note the message contents and contact the sales representative. CM Buffer SBE detected. %1$ Explanation A correctable error was detected in the switch chip. It is automatically corrected by hardware. z [[Inserted string]]%1$: Supplementary code for the error Solution If the same message reappears after restarting the switch, note the message contents and contact the sales representative. 287/315 All Rights Reserved, Copyright (C) PFU LIMITED 2009
