Download Epson Progression User Setup Information
Transcript
Defining your own drive type If the parameters for your hard disk that are listed in its documentation do not match any of the types listed in the table above, you can define your own type. Follow these steps: 1. Highlight the Hard disk 1: or Hard disk 2 : option and press [Marl 2. Press [nl. You see the following prompt in the middle of the screen: Enter number of cylinders on disk 3. Use the numeric keys along the top of the keyboard or on the numeric keypad (with the num lock function turned on) to enter the appropriate value for the number of cylinders on your hard disk. (If you make a mistake, press t!iFiGG <to erase the value before you go to the next step.) 4. Press [Enbr). You see a prompt to enter the number of cylinder (read/write) heads on the drive. 5. Type the correct value as described in step 3 and press [Enbrl. 6. You see a prompt to enter the number of sectors per track on the disk. T the correct value as described in step 3 and pressdr m . You do not enter a value for the drive size; SETUP does this automatically based on the other parameters. SETUP displays your hard disk drive type as UD followed by the parameters you entered. 2-22 Running the SETUP Program