Download Avaya Media Processing Server Series System (Software Release 2.1) Reference Manual

Avaya Media Processing Server Series System Reference Manual
Verifying/Modifying Boot ROM Settings
The TMS, DCC, and NICs contain field programmable gate arrays (FPGA) that must
be loaded with an image that provides the functionality for the board. These images
are loaded whenever SRP starts. The boot ROM defines parameters such as which
image file to load, the clock frequency of the board, IP addresses, and other local
parameters. When the system is installed, the default factory settings must be verified
and/or modified to ensure the correct image files are loaded and that the local IP
addresses for the TMS and server (where the image definition files (*.idf) reside)
are correct.
Whenever a new system is installed or has assemblies added or replaced, the boot
ROM should be verified and, if necessary, modified. When replacing or adding
assemblies, only the boot ROM on the associated TMS(s) or NIC(s) will need to be
checked.
For a TMS, first verify or modify the boot ROM settings for the DCC. (See DCC Boot
ROM on page 252.) Then, verify/modify the boot ROM for the TMS. (See TMS Boot
ROM on page 256.) Follow this order for each TMS in the system. For the NICs, no
particular order is needed.
Checking the boot ROM is an interactive process. If you elect to modify any of the
current boot ROM settings, you will be prompted on each individual item to change or
accept the current value (by hitting <RETURN>).
DCC Boot ROM
Perform the following procedure to verify/modify the boot ROM settings for each
DCC in the TMS. Repeat for all DCCs in a TMS, then proceed to TMS Boot ROM on
page 256.
TMS Front Panel
TMS Remote
Terminal Connector
AUDIO CONSOLE
DCC Remote
Terminal Connector
SLOT 1
SLOT 3
SLOT 2
SLOT 4
14 12 10 8 6 4 2 0
HUB B
HUB A
15 13 11 9 7 5 3 1
E S S M C
X L L P O
T 4 3
L
E S S M C
X L L P O
T 2 1
L
1. Connect a serial console to the remote terminal connector of the DCC.
(See illustration of TMS Front Panel above and Debug Terminal
Connection on page 250.)
Page 252
# P0602477 Ver: 3.1.11