Download Avaya Configuring IP Multicasting and Multimedia Services User's Manual

Configuring IP Multicasting and Multimedia Services
Setting the Bandwidth Interval
By default, LRM measures instantaneous bandwidth over a 10-second interval. If
10 seconds is not sufficient, you can specify a different bandwidth interval for this
interface, from 1 through 214,748,364 seconds (nearly 7 years).
To set the bandwidth interval, complete the following tasks:
Site Manager Procedure
You do this
System responds
1. In the Configuration Manager window,
click on any connector for a line that is
configured for RSVP.
The Edit Connector window opens.
2. Click on Edit Line Resources in the Edit
Connector window.
The Edit Line Resources window opens.
3. Set the Bandwidth Interval (Secs)
parameter. Click on Help or see the
parameter description on page A-30.
4. Click on OK.
8-8
You return to the Configuration Manager
window.
117355-D Rev 00