Download Avaya Configuring IP Multicasting and Multimedia Services User's Manual

Configuring IP Multicasting and Multimedia Services
Disabling and Reenabling Tree Pruning
Tree pruning is enabled on the router by default. You can use the BCC or Site
Manager to disable and reenable tree pruning on the router. For information about
DVMRP tree pruning, see “Tree Pruning” on page 4-7.
Using the BCC
To disable or reenable tree pruning, navigate to the global DVMRP prompt (for
example, box; ip; dvmrp) and enter:
pruning <state>
state is one of the following:
enabled (default)
disabled
For example, the following command disables DVMRP tree pruning on the router:
dvmrp# pruning disabled
dvmrp#
Using Site Manager
To disable or reenable tree pruning, complete the following tasks:
Site Manager Procedure
You do this
System responds
1. In the Configuration Manager window,
choose Protocols.
The Protocols menu opens.
2. Choose IP.
The IP menu opens.
3. Choose DVMRP.
The DVMRP menu opens.
4. Choose Global.
The DVMRP Global Configuration
window opens.
5. Set the Pruning Enable parameter. Click
on Help or see the parameter description
on page A-7.
6. Click on Save.
4-12
You return to the Configuration Manager
window.
117355-D Rev 00