Download Avaya BCM Management User Guide

362
Chapter 6 Performance Management
Accessing the Dial Up performance monitor
This section describes how to access and use the Dial Up performance monitor to analyze dialup
traffic characteristics. The statistics compiled by the system indicate packet traffic over the dial up
connection. A packet is the unit of data that is routed between an origin and a destination over the
dial up connection.
Each packet is separately numbered and includes the IP address of the dial up destination. When
the packets have all arrived, they are reassembled into the original file.
This section also refers to the following:
•
•
•
“Accessing the QoS Graph and Table” on page 364)
“Accessing the QoS Queue 1-5 Graph and Table” on page 365)
“Accessing the QoS Queue 6-9 Graph and Table” on page 366)
To access the dialup performance manager
1
Access the correct Business Communications Manager in your network from the Unified
Manager workstation browser.
2
On the Unified Manager main page select Configure.
3
On the navigation tree click and expand the Resources tree.
The Unified Manager displays the system resources page.
4
Click and expand the Dial Up resource tree.
5
On the Dialup resource page, select Performance from the top line menu.
6
Select one of the Dialup performance monitor selections from the drop down menu:
a
QoS Graph (see “Accessing the QoS Graph and Table)
b
QoS Table (see “Accessing the QoS Graph and Table)
c
QoS Queue 1-5 Graph (see “Accessing the QoS Queue 1-5 Graph and Table)
d
QoS Queue 1-5 Table (see “Accessing the QoS Queue 1-5 Graph and Table)
e
QoS Queue 6-9 Graph (see “Accessing the QoS Queue 6-9 Graph and Table)
f
QoS Queue 6-9 Table (see “Accessing the QoS Queue 6-9 Graph and Table)
P0609330 2.0