Download Finisar FTLX3815M3XX network transceiver module
Transcript
Finisar Productt Specificaation Multiprotoccol 80Km m, 10Gb/ss DWDM M XFP Op ptical Trransceiver FTLX X3815M33xx PRODU UCT FEATU URES • Gb/s to 11.35 5Gb/s Supports 8.5G • Hot-pluggabl H le XFP footp print • RoHS-6 R Com mpliant (lead--free) • 100GHz ITU Grid, C-Ban nd • Duplex D LC co onnector • Power dissipaation <3.5W W • Built-in B digitaal diagnosticc functions • Temperature T range: 0°C to t 70°C • Point-to-Poin nt & OSNR optimized o versions • APPL LICATIONS S • IT TU G.698.1, D DW100S-2Dxx compliant DW WDM 10G SO ONET/SDH • IT TU G.698.2, D DW100C-2Axx compliant DW WDM 10G SO ONET/SDH • DW WDM, IEEE 10GBASE-Z ZR based Etheernet • 100GFC (SM-12200-LL-L) & 8GFC (SM-8800LC C-L) compliannt • IT TU G.709 / OT TN FEC applications Reference R Clo ock Not Req quired S Form Factor 10Gbb/s (XFP) trransceiver ccomplies witth Finisar’s FTLX3815M3xx Small X Multi-S Source Agreeement (MSA A) Specificaation1. It suppports ampliified DWDM M the XFP 10Gb b/s SONET/SDH, 10 Gigabit Etherrnet, and 100 Gigabit Fibbre Channell applicationns over 80km of fib ber without dispersion compensatioon. Digital ddiagnostics functions arre availaable via a 2-wire serial interface, ass specified iin the XFP M MSA. The transceiver is 3 RoHS S compliant and lead freee per Direcctive 2002/995/EC , and Finisar Appplication Notte AN-2 20384. PRO ODUCT SEL LECTION FTLX X3815M3xxx xx: 100GH Hz ITU-T chaannel 1174161 Rev.: A02 2 Page 1 of 24 This doccument contains prroprietary and confidential informatiion to Finisar Corpp. This document and the entire infoormation contained herein, and any other tangible reprresentation thereoff, is not to be copiied, reproduced, duuplicated, distributted, or modified d, in whole or in paart, and/or used wiithout the expresseed written consentt of Finisar Corp. Printed copy c may not be b the latest rev vision please rrefer to Agile fo for current revission FTLX X3815M3xx DW WDM XFP Pro oduct Specificaation – Decembber 2013 I.. III. Finisar Pin Descriptions D Pin 1 2 3 Logic LVTTL-I 4 LVTTL-O 5 6 7 8 9 10 11 LVTTL-I Symbol GND VEE5 Mod-Desel Interrupt TX_DIS VCC5 GND VCC3 VCC3 SCL SDA 12 LVTTL-I LVTTLI/O LVTTL-O Mod_Abss 13 LVTTL-O Mod_NR 14 15 16 17 18 19 20 21 LVTTL-O LVTTL-I RX_LOS GND GND RDRD+ GND VCC2 P_Down/RS ST 22 23 24 PECL-I VCC2 GND RefCLK+ + 25 PECL-I RefCLK- CML-O CML-O Nam me/Descriptioon Module Ground G Optional –5.2 – Power Suupply – Not used Module De-select; D Wheen held low alloows the modulle to respond to o 2-wire serial interface com mmands Interrupt (bar); Indicate s presence of aan important coondition which can n be read over the serial 2-wiire interface Transmittter Disable; Traansmitter laserr source turnedd off +5 Powerr Supply Module Ground G +3.3V Po ower Supply +3.3V Po ower Supply Serial 2-w wire interface cclock Serial 2-w wire interface ddata line Reff. 1 Module Absent; A Indicattes module is nnot present. Groounded in the module. Module Not N Ready; Finnisar defines it as a logical OR R between RX_LOS R and L Loss of Lock inn TX/RX. Receiver Loss of Signall indicator Module Ground G Module Ground G Receiver inverted data ooutput Receiver non-inverted ddata output Module Ground G +1.8V Po ower Supply – N Not used Power Do own; When higgh, places the m module in the llow power staand-by mode annd on the fallinng edge of P_D Down initiates a module reset Reset; Th he falling edge initiates a com mplete reset of tthe module in ncluding the 2--wire serial inteerface, equivallent to a power cyccle. +1.8V Po ower Supply – N Not used Module Ground G Referencee Clock non-innverted input, A AC coupled onn the host board d – Not Requiired Referencee Clock inverteed input, AC cooupled on the hhost board – Not N Required Module Ground G Module Ground G Transmittter inverted datta input Transmittter non-inverteed data input Module Ground G 2 2 1 2 2 2 2 1 1 1 1 26 GND 1 27 GND 1 28 CML-I TD29 CML-I TD+ 30 GND 1 Notes: 1. Module M circuit ground g is isolatted from modu ule chassis grouund within the module. 2. Open O collector; should be pulled up with 4.7k – 10kohms oon host board tto a voltage bettween 3.15V an nd 3.6V. 1174161 Rev.: A02 2 Page 2 of 24 This doccument contains prroprietary and confidential informatiion to Finisar Corpp. This document and the entire infoormation contained herein, and any other tangible reprresentation thereoff, is not to be copiied, reproduced, duuplicated, distributted, or modified d, in whole or in paart, and/or used wiithout the expresseed written consentt of Finisar Corp. Printed copy c may not be b the latest rev vision please rrefer to Agile fo for current revission Finisar FTLX X3815M3xx DW WDM XFP Pro oduct Specificaation – Decembber 2013 Diagram of Hosst Board Conn nector Block P Pin Numbers and Names II. Absolute Maximum Ratings Parameeter Maxim mum Supply Voltage V #1 Maxim mum Supply Voltage V #2 Storag ge Temperaturee Case Operating O Tem mperature Receiv ver Damage Th hreshold 1174161 Symbol Vcc3 Vcc2 TS TOP PRdmg Min -0.5 -0.5 -40 0 +5 Typ Max 4.0 6.0 85 70 Unit V V °C °C dBm Rev.: A02 2 Reff. Page 3 of 24 This doccument contains prroprietary and confidential informatiion to Finisar Corpp. This document and the entire infoormation contained herein, and any other tangible reprresentation thereoff, is not to be copiied, reproduced, duuplicated, distributted, or modified d, in whole or in paart, and/or used wiithout the expresseed written consentt of Finisar Corp. Printed copy c may not be b the latest rev vision please rrefer to Agile fo for current revission Finisar FTLX X3815M3xx DW WDM XFP Pro oduct Specificaation – Decembber 2013 III. Electrica al Characterristics (TOP = -5 to 70 °C, V CC5 = 4.75 to 5.25 Volts) Parameeter Supply y Voltage #1 Supply y Voltage #2 Supply y Current – Vccc5 supply Supply y Current – Vccc3 supply Modulle total power dissipation Transsmitter Input differential d imp pedance Differrential data inpu ut swing Transm mit Disable Vo oltage Transm mit Enable Volltage Receiv ver Differrential data outp put swing Data output o rise timee Data output o fall timee LOS Fault F LOS Normal N Powerr Supply Rejection Reference Clock (A AC-Coupled) Singlee-ended peak to o peak voltage swing Singlee-ended resistaance Frequeency clock toleerance Duty cycle c FTL LX3815M3xx Symbol Min Vcc3 3.13 Vcc5 4.75 Icc5 Icc3 P Rin Vin,pp VD VEN Vout,pp tr tf VLOS faultt VLOS norm m PSR Typ Max 3.46 5.25 450 750 3.5 Unit V V mA mA W 820 Vcc GND+ 0.8 Ω mV V V 100 120 2.0 GND 500 Vcc – 0.5 GND VSEPP 200 RL Δf - 40 -100 40 850 35 35 VccHOST GND+0.5 See Note 7 below 50 mV ps ps V V 450 mV 60 +100 60 ppm % Reff. 1 2 3 4 5 5 6 6 7 Notes: 1. Maximum M total power value iss specified acro oss the full tem mperature and vvoltage range. 2. After A internal AC A coupling. 3. Or O open circuit. 4. In nto 100 ohms differential d term mination. 5. 20 0 – 80 % 6. Loss Of Signal is i open collecto or to be pulled d up with a 4.7kk – 10kohm ressistor to 3.15 – 3.6V. Logic 0 in ndicates normal operation; log gic 1 indicates no signal deteected. 7. Peer Section 2.7.1. in the XFP MSA M Specificaation1. 1174161 Rev.: A02 2 Page 4 of 24 This doccument contains prroprietary and confidential informatiion to Finisar Corpp. This document and the entire infoormation contained herein, and any other tangible reprresentation thereoff, is not to be copiied, reproduced, duuplicated, distributted, or modified d, in whole or in paart, and/or used wiithout the expresseed written consentt of Finisar Corp. Printed copy c may not be b the latest rev vision please rrefer to Agile fo for current revission Finisar FTLX X3815M3xx DW WDM XFP Pro oduct Specificaation – Decembber 2013 IV. Optical Characterist C tics (EOL, TOP C, VCC5 = 4.75 to 5.25 Volts)) O = -5 to 70°C Transmitter Parameeter Outpu ut Opt. Pwr: 9/125 SMF Opticaal Extinction Ratio R Center Wavelength Spacing Transm mitter Center Wavelength W – End Of O Life Transm mitter Center Wavelength W – Begin nning Of Life Sidem mode Suppressiion ratio Tx Jittter Generation (peak-to-peak k) Tx Jittter Generation (RMS) Symbol POUT ER Min -1 8.2 Typ λc X-100 100 X λc X-25 X SSRmin Txj 35 TxjRMS Tx Lo ocked Eye (Colld Start) Receiv ver Overload Opticall Center Wavellength Receiv ver Reflectancee LOS De-Assert D LOS Assert A LOS Hysteresis H PMAX λC Rrx LOSD LOSA -6 1270 M Max +3 Ref X X+100 Unit dB Bm ddB GH Hz ppm X X+25 ppm 2 0.1 ddB U UI 3 00.01 U UI 4 30 s 1615 -27 -30 -37 0.5 1 2 ddBm nnm ddB ddBm ddBm ddB FTL LX3815M3xx Receiv ver Sensitivity y5 5 Data rate r (Gb//s) BER Dispersion n (ps/nm) 8.5 5 9.95 10.3 10.7 11.1 11.3 1e-12 1e-12 1e-12 1e-4 1e-4 1e-4 -500 to o 1450 -500 to o 1450 1174161 -500 to o 1450 -500 to o 1450 -500 to o 1450 -500 to o 1450 Sensitivity S backk-toback at OSNR>30dB B (dBm) -24 -24 -24 -27 -27 -27 Pow wer Penalty at O OSNR>30dB (dB) Threshold Adjust Required 3 3 3 3 3 3 No No No Yes Yes Yes Rev.: A02 2 Page 5 of 24 This doccument contains prroprietary and confidential informatiion to Finisar Corpp. This document and the entire infoormation contained herein, and any other tangible reprresentation thereoff, is not to be copiied, reproduced, duuplicated, distributted, or modified d, in whole or in paart, and/or used wiithout the expresseed written consentt of Finisar Corp. Printed copy c may not be b the latest rev vision please rrefer to Agile fo for current revission FTLX X3815M3xx DW WDM XFP Pro oduct Specificaation – Decembber 2013 Finisar R OSNR Perforrmance6 Data rate (Gb//s) BER Dispersio on (ps/nm) Max OSN NR w/ dispersioon at Power: -77 to -18dBm ((dB) 8.5 5 9.95 10.3 10.7 11.1 11.3 1e-12 1e-12 1e-12 1e-4 1e-4 1e-4 -500 to o 1450 -500 to o 1450 -500 to o 1450 -500 to o 1300 -500 to o 1300 -500 to o 1100 28 28 28 22 22 22 6 Threshhold Adjusttm. Requirred No No No Yess Yess Yess Notes: 1. Corresponds to approximately y 0.8 nm. 2. X = Specified IT TU Grid wavellength. Waveleength stability iis achieved witthin 10 secondds of power up.. 3. Measured M with a host jitter of 50 mUI peak-tto-peak. 4. Measured M with a host jitter of 7 mUI RMS. 5. Measured M at 152 28-1600nm witth worst ER; PRBS31. P 6. All A OSNR meassurements are performed p with h 0.1nm resoluution. 1174161 Rev.: A02 2 Page 6 of 24 This doccument contains prroprietary and confidential informatiion to Finisar Corpp. This document and the entire infoormation contained herein, and any other tangible reprresentation thereoff, is not to be copiied, reproduced, duuplicated, distributted, or modified d, in whole or in paart, and/or used wiithout the expresseed written consentt of Finisar Corp. Printed copy c may not be b the latest rev vision please rrefer to Agile fo for current revission FTLX X3815M3xx DW WDM XFP Pro oduct Specificaation – Decembber 2013 Finisar Part Numbers fo or Amplified (OSNR) Application A s: Channel # 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 1174161 Producct Code FTLX38 815M317 FTLX38 815M318 FTLX38 815M319 FTLX38 815M320 FTLX38 815M321 FTLX38 815M322 FTLX38 815M323 FTLX38 815M324 FTLX38 815M325 FTLX38 815M326 FTLX38 815M327 FTLX38 815M328 FTLX38 815M329 FTLX38 815M330 FTLX38 815M331 FTLX38 815M332 FTLX38 815M333 FTLX38 815M334 FTLX38 815M335 FTLX38 815M336 FTLX38 815M337 FTLX38 815M338 FTLX38 815M339 FTLX38 815M340 FTLX38 815M341 FTLX38 815M342 FTLX38 815M343 FTLX38 815M344 FTLX38 815M345 FTLX38 815M346 FTLX38 815M347 FTLX38 815M348 FTLX38 815M349 FTLX38 815M350 FTLX38 815M351 FTLX38 815M352 FTLX38 815M353 FTLX38 815M354 FTLX38 815M355 FTLX38 815M356 FTLX38 815M357 FTLX38 815M358 FTLX38 815M359 FTLX38 815M360 FTLX38 815M361 Frequency F (THz Hz) 191.7 191.8 191.9 192.0 192.1 192.2 192.3 192.4 192.5 192.6 192.7 192.8 192.9 193.0 193.1 193.2 193.3 193.4 193.5 193.6 193.7 193.8 193.9 194.0 194.1 194.2 194.3 194.4 194.5 194.6 194.7 194.8 194.9 195.0 195.1 195.2 195.3 195.4 195.5 195.6 195.7 195.8 195.9 196.0 196.1 Centerr Wavelength (n nm) 1563.86 1563.05 1562.23 1561.42 1560.61 1559.79 1558.98 1558.17 1557.36 1556.55 1555.75 1554.94 1554.13 1553.33 1552.52 1551.72 1550.92 1550.12 1549.32 1548.51 1547.72 1546.92 1546.12 1545.32 1544.53 1543.73 1542.94 1542.14 1541.35 1540.56 1539.77 1538.98 1538.19 1537.40 1536.61 1535.82 1535.04 1534.25 1533.47 1532.68 1531.90 1531.12 1530.33 1529.55 1528.77 Rev.: A02 2 Page 7 of 24 This doccument contains prroprietary and confidential informatiion to Finisar Corpp. This document and the entire infoormation contained herein, and any other tangible reprresentation thereoff, is not to be copiied, reproduced, duuplicated, distributted, or modified d, in whole or in paart, and/or used wiithout the expresseed written consentt of Finisar Corp. Printed copy c may not be b the latest rev vision please rrefer to Agile fo for current revission Finisar FTLX X3815M3xx DW WDM XFP Pro oduct Specificaation – Decembber 2013 V. Additional Specifica ations and Response R Tim ming Parameeter Bit Raate Maxim mum Supported d Link Length Symbol BR LMAX Min 8.5 Typ Max 11.35 80 Units Gb/s km Reff. 1 2 Notes: 1. Amplified A SONET OC-192, 10G Ethernet, SONET S OC-1992 with FEC, 10G Ethernet w with FEC, 10 0GFC, and 8GFC 2. Distance D indicattes dispersion budget. b Optical amplificationn may be requirred to achieve maximum diistance. Response timing:: Parameter Tx_Diis Min Assert De-asserrt Asset De-asserrt Asset De-asserrt Asset De-asserrt Rx_LO OS Mod_N NR Interru upt P_Dow wn/RST Time P_Dow wn/RST Asser Delay Start-u up time (Initiallize time) 1.. 1174161 Typ Max 10 2 100 100 1 1 200 500 10 100 300 Units us ms us us ms ms ms us us us ms Reff. 1 Time requirred for transponder to be read dy to begin I2C C communicatiion with host fr from a cold starrt or a hardwaare reset condittion. Rev.: A02 2 Page 8 of 24 This doccument contains prroprietary and confidential informatiion to Finisar Corpp. This document and the entire infoormation contained herein, and any other tangible reprresentation thereoff, is not to be copiied, reproduced, duuplicated, distributted, or modified d, in whole or in paart, and/or used wiithout the expresseed written consentt of Finisar Corp. Printed copy c may not be b the latest rev vision please rrefer to Agile fo for current revission Finisar FTLX X3815M3xx DW WDM XFP Pro oduct Specificaation – Decembber 2013 VI. Environm mental Speccifications Finisar XFP transsceivers have an operatin ng temperatuure range froom 0°C to +70°C case temperature. Parameter Case Operating O Tem mperature Storag ge Temperaturee VII. Symbol Top Tsto Min 0 -40 Typ Max 70 85 Units °C °C Reff. Regulatory Complia ance Finisar XFP transsceivers are Class 1 Laseer Products. They are ceertified per thhe followingg dards: stand Fea ature Agency Standaard Laseer Eye Saafety Laseer Eye Saafety DA/CDRH FD CDRH 21 CFR 1040 annd Laser Noticce 50 TÜV TBD Elecctrical Saafety Elecctrical Saafety TÜV EN 6082 25-1: 1994+A111:1996+A2:20001 IEC 608 825-1: 1993+A A1:1997+A2:20001 IEC C 60825-2: 20000, Edition 2 EN 609950 CLASS 38862.07 CLASS 38862.87 TBD UL/CSA Certificate Number TBD TBD Copiees of the refeerenced certificates are available a at F Finisar Corpporation upon request. 1174161 Rev.: A02 2 Page 9 of 24 This doccument contains prroprietary and confidential informatiion to Finisar Corpp. This document and the entire infoormation contained herein, and any other tangible reprresentation thereoff, is not to be copiied, reproduced, duuplicated, distributted, or modified d, in whole or in paart, and/or used wiithout the expresseed written consentt of Finisar Corp. Printed copy c may not be b the latest rev vision please rrefer to Agile fo for current revission FTLX X3815M3xx DW WDM XFP Pro oduct Specificaation – Decembber 2013 Finisar VIII.. Digital Diagnostics D Functions F As defined d by the t XFP MSA M 1, Finisaar XFP trannsceivers prrovide digittal diagnostiic functtions via a 2-wire 2 serial interface, which allow ws real-timee access to tthe followinng operaating parameeters: • • • • • • Transceiv ver temperatu ure Laser biass current Transmittted optical power Received optical pow wer Transceiv ver supply vo oltage TEC Tem mperature It also provides a sophisticateed system off alarm and warning flaggs, which m may be used tto w particular operating g parameterrs are outside of a factorry-set normaal alert end-users when rangee. The operating and a diagnostics informaation is moonitored andd reported by a Digitaal Diagn nostics Tran nsceiver Con ntroller (DD DTC) insidee the transceeiver, whichh is accesseed throu ugh the 2-wirre serial inteerface. When n the serial pprotocol is aactivated, thhe serial clocck signaal (SCL pin)) is generateed by the ho ost. The possitive edge cclocks data into the XF FP transcceiver into those t segmeents of its memory m mapp that are nnot write-prootected. Thhe negattive edge clo ocks data fro om the XFP transceiver.. The serial data signal (SDA pin) is bi-dirrectional forr serial dataa transfer. The T host usees SDA in cconjunction with SCL tto mark k the start an nd end of seerial protoco ol activationn. The mem mories are orrganized as a seriess of 8-bit daata words thaat can be ad ddressed indiividually or sequentiallyy. The 2-wirre seriall interface provides p sequ uential or raandom accesss to the 8 bbit parameteers, addresseed from 000h to the maximum address a of th he memory. m detaileed informatio on, includin ng memory m map definitiions, please see the XF FP For more MSA A documentation1. Receiver Thresh hold Adjustm ment The FTLX3815M F M3xx also prrovide access to receiverr decision thhreshold adjuustment via 22wire serial interfface, in order to improvee receiver O OSNR perforrmance baseed on specifi fic link conditions. c It is implemeented as follo ows: • 1174161 Rx Threshold of XFP P transceivers will be faactory-set foor optimizedd performancce EC applicatiions. This will w be the ddefault valuue during booth cold staart in non-FE (power-up p) and warm m start (modu ule reset). Rev.: A02 2 Page 100 of 24 This doccument contains prroprietary and confidential informatiion to Finisar Corpp. This document and the entire infoormation contained herein, and any other tangible reprresentation thereoff, is not to be copiied, reproduced, duuplicated, distributted, or modified d, in whole or in paart, and/or used wiithout the expresseed written consentt of Finisar Corp. Printed copy c may not be b the latest rev vision please rrefer to Agile fo for current revission FTLX X3815M3xx DW WDM XFP Pro oduct Specificaation – Decembber 2013 • • • Finisar The transsceiver supports adjustm ment of Rx T Threshold vvalue by the host througgh register 76d, table 01h h. This is inttended to be used in FEC C applicationns. 0 is a vo olatile mem mory. Thereffore if the ttransceiver is Register 76d, table 01h gister starts up u with a vaalue of 00h w which corresponds to thhe power-cycled, the reg x Threshold value. default Rx The thresshold adjusttment input value is 2’’s complemeent 7 bit vaalue (-128 tto +127). The T default Rx thresholld value willl be approxximately 0. F Full range oof adjustmen nt provides at least a ±10% ± changge in Rx thrreshold from m the defauult value. SBS suppression n, dither ton ne Set Address A 111, bit 1 to “0” to enable to one, “1” to diisable ditherr tone (defauults: frequ uency = 40kH Hz , tone is disabled). d Please contacct your Finisar RSM or P PLM if BS suppresssion. speciific amplitud des and frequ uencies are needed n for SB Channel CDR R Bypass ra ate select: 8.5Gb/s Fibre-C For 8G 8 FC operaation, write “1” “ to Byte 116, 1 bit 1. E Every time thhat the moduule is power cycleed, this will need n to be ree-written (bitt goes back tto “0” and C CDR is now set for 10Gb b/s operation n) in order to o operate pro operly at 8G FC. Contaact your Finisar RSM orr PLM for deetails on the CDR Bypasss. 1174161 Rev.: A02 2 Page 11 of 24 This doccument contains prroprietary and confidential informatiion to Finisar Corpp. This document and the entire infoormation contained herein, and any other tangible reprresentation thereoff, is not to be copiied, reproduced, duuplicated, distributted, or modified d, in whole or in paart, and/or used wiithout the expresseed written consentt of Finisar Corp. Printed copy c may not be b the latest rev vision please rrefer to Agile fo for current revission Finisar FTLX X3815M3xx DW WDM XFP Pro oduct Specificaation – Decembber 2013 Alarm m and Warrning Thresh hold Valuess Addreess Parameeter 02-03 3 04-05 5 06-07 7 08-09 9 10-17 7 18-19 9 20-21 1 22-23 3 24-25 5 26-27 7 28-29 9 30-31 1 32-33 3 34-35 5 36-37 7 38-39 9 40-41 1 42-43 3 44-45 5 46-47 7 48-49 9 50-51 1 52-53 3 54-55 5 56-57 7 Temp High Alarm Temp Low Alarm Temp High Warning W Temp Low Warning W Reserved Bias High Alarm A Bias Low Alarm A Bias High Warning W Bias Low Warning W TX Power Hig gh Alarm TX Power Lo ow Alarm TX T Power High h Warning TX T Power Low w Warning RX Power Hig gh Alarm RX Power Lo ow Alarm RX R Power High h Warning RX R Power Low w Warning AUX 1 High h Alarm AUX 1 Low w Alarm AUX 1 High Warning AUX 1 Low Warning W AUX 2 High h Alarm AUX 2 Low w Alarm AUX 2 High Warning AUX 2 Low Warning W Threshoold Values 78 -13 73 -8 UNITS 120 10 110 15 +5 -3 +4 -2 -4 -31 -5 -25 57 20 54 25 3.5644 3.0366 3.465 3.135 m mA m mA m mA m mA dB Bm dB Bm dB Bm dB Bm dB Bm dB Bm dB Bm dB Bm C C C C V V V V C C C C A/D Table T Add dress 96-97 98-99 100-101 102-103 104-105 106-107 108-109 1174161 Parameter P Intternal module Temp Reserved TX X bias current Transmit Power Reeceive Power Aux xiliary monitor1 1 Aux xiliary monitor2 2 Accuracy y +/-3 Resolutioon +/- 0.1 Units degC +/-8 +/-1.5 dB B +/-1.5 dB B +/-3 +/-3 +/-2 0.1 +/-0.1 +/-0.1 +/-100 uA uW uW degC uV N Note s PCB mounted thermocoupple Laser Tempperature 3.3V Supplyy Voltage Rev.: A02 2 Page 122 of 24 This doccument contains prroprietary and confidential informatiion to Finisar Corpp. This document and the entire infoormation contained herein, and any other tangible reprresentation thereoff, is not to be copiied, reproduced, duuplicated, distributted, or modified d, in whole or in paart, and/or used wiithout the expresseed written consentt of Finisar Corp. Printed copy c may not be b the latest rev vision please rrefer to Agile fo for current revission FTLX X3815M3xx DW WDM XFP Pro oduct Specificaation – Decembber 2013 1174161 Finisar Rev.: A02 2 Page 133 of 24 This doccument contains prroprietary and confidential informatiion to Finisar Corpp. This document and the entire infoormation contained herein, and any other tangible reprresentation thereoff, is not to be copiied, reproduced, duuplicated, distributted, or modified d, in whole or in paart, and/or used wiithout the expresseed written consentt of Finisar Corp. Printed copy c may not be b the latest rev vision please rrefer to Agile fo for current revission Finisar FTLX X3815M3xx DW WDM XFP Pro oduct Specificaation – Decembber 2013 EEPR ROM (Tablle A0h) Byte Addr 0 1 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 52 54 56 58 60 Bit He ex LSB Size Name 00 0 0 8 Identifieer 01 0 8 Signal Co onditioner Control 02 2 0 16 Temp Hiigh Alarm 04 4 0 16 Temp Lo ow Alarm 06 6 0 16 Temp Hiigh Warning 08 8 0 16 Temp Lo ow Warning 0A A 0 16 Aux3 Higgh Alarm 0C C 0 16 Aux3 Low w Alarm 0E 0 16 Aux3 Higgh Warning 0 0 16 Aux3 Low w Warning 10 12 2 0 16 Bias High h Alarm 14 4 0 16 Bias Low w Alarm 16 6 0 16 Bias High h Warning 18 8 0 16 Bias Low w Warning 1A A 0 16 TX Poweer High Alarm 1C C 0 16 TX Poweer Low Alarm 1E 0 16 TX Poweer High Warning 20 0 0 16 TX Poweer Low Warning 22 2 0 16 RX Poweer High Alarm 24 4 0 16 RX Poweer Low Alarm 26 6 0 16 RX Poweer High Warning 28 8 0 16 RX Poweer Low Warning 2A A 0 16 AUX 1 Hiigh Alarm 2C C 0 16 AUX 1 Lo ow Alarm 2E 0 16 AUX 1 Hiigh Warning 30 0 0 16 AUX 1 Lo ow Warning 32 2 0 16 AUX 2 Hiigh Alarm 34 4 0 16 AUX 2 Lo ow Alarm 36 6 0 16 AUX 2 Hiigh Warning 38 8 0 16 AUX 2 Lo ow Warning 3A A 0 16 Optional VPS Control Registerrs 3C C 0 80 RESERVEED 70 46 6 0 8 Acceptable BER 71 47 7 0 8 Actual B BER 72 48 8 0 8 Wavelen ngth Set MSB 73 49 9 0 8 Wavelen ngth Set LSB 74 75 4A A 4B 0 0 8 8 Wavelen ngth Error MSB Wavelen ngth Error MSB 76 C 4C 0 8 Amplitude Adjustment 77 78 80 80 80 80 80 80 80 80 81 81 81 81 81 81 81 81 4D D 4E 50 0 50 0 50 0 50 0 50 0 50 0 50 0 50 0 51 51 51 51 51 51 51 51 0 0 0 1 2 3 4 5 6 7 0 1 2 3 4 5 6 7 8 16 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Phase Adjustment RESERVEED L‐ TX Pow wer Low Alarm L‐ TX Pow wer High Alarm L‐ TX Biaas Low Alarm L‐ TX Biaas High Alarm L‐ Vcc Lo ow Alarm L‐ Vcc Hiigh Alarm L‐ Temp Low Alarm L‐ Temp High Alarm RESERVEED RESERVEED L‐ AUX 2 2 Low Alarm L‐ AUX 2 2 High Alarm L‐ AUX 1 1 Low Alarm L‐ AUX 1 1 High Alarm L‐ RX Power Low Alarm L‐ RX Power High Alarm 1174161 Desccription Typee of serial transceiver Signaal Conditioner Control MSB at low address MSB at low address MSB at low address MSB at low address MSB at low address MSB at low address MSB at low address MSB at low address MSB at low address MSB at low address MSB at low address MSB at low address MSB at low address MSB at low address MSB at low address MSB at low address MSB at low address MSB at low address MSB at low address MSB at low address MSB at low address MSB at low address MSB at low address MSB at low address MSB at low address MSB at low address MSB at low address MSB at low address Optio onal VPS Control Regi sters RESEERVED Acce ptable BER Reported by the FEC to the Module Actual BER Reported by the FEC to the Module User input of Wavelength setpoint. (Units of nm) 0.05n User input of Wavelength setpoint. (Units of nm) 0.05n Monitor of Current Waveleength Error. (Units of 0.0 005nm) Signeed 2's complement value Relattive amplitude of receeive quantization thresshold Phasse of receive quantizattion relative to 0.5 UI RESEERVED Latch hed low TX Power alarrm. Latch hed high TX Power alarm. Latch hed low TX Bias alarm.. Latch hed high TX Bias alarm m. Latch hed low Vcc alarm. Latch hed high Vcc alarm. Latch hed low Temperature alarm. Latch hed high Temperaturee alarm RESEERVED RESEERVED Latch hed low AUX2 monitorr alarm. Latch hed high AUX2 monito or alarm. Latch hed low AUX1 monitorr alarm. Latch hed high AUX1 monito or alarm. Latch hed low RX Power alarrm. Latch hed high RX Power alaarm. Value 6 0 78 ‐13 73 ‐8 0 0 0 0 120 10 110 15 +5 ‐3 +4 ‐2 ‐4 ‐31 ‐5 ‐25 57 20 54 25 3.564 3.036 3.465 3.135 0 NA Hex Value 6 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 NA FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE NA NA FALSE FALSE FALSE FALSE FALSE FALSE 0 NA 0 0 0 0 0 0 0 0 NA NA 0 0 0 0 0 0 Rev.: A02 2 00 00 00 00 00 00 00 00 NA Page 144 of 24 This doccument contains prroprietary and confidential informatiion to Finisar Corpp. This document and the entire infoormation contained herein, and any other tangible reprresentation thereoff, is not to be copiied, reproduced, duuplicated, distributted, or modified d, in whole or in paart, and/or used wiithout the expresseed written consentt of Finisar Corp. Printed copy c may not be b the latest rev vision please rrefer to Agile fo for current revission Finisar FTLX X3815M3xx DW WDM XFP Pro oduct Specificaation – Decembber 2013 EEPR ROM (Tablle A0h) conttinued 82 82 82 82 82 82 82 82 83 83 83 83 83 83 83 83 84 84 84 52 52 52 52 52 52 52 52 53 53 53 53 53 53 53 53 54 54 54 0 1 2 3 4 5 6 7 0 1 2 3 4 5 6 7 0 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 L‐ TX Powerr Low Warning L‐ TX Powerr High Warning L‐ TX Bias Lo ow Warning L‐ TX Bias High Warning L‐ Vcc Low W Warning L‐ Vcc High W Warning L‐ Temp Low w Warning L‐ Temp Higgh Warning RESERVED RESERVED w Warning L‐ AUX 3 Low L‐ AUX 2 Higgh Warning L‐ AUX 1 Low w Warning L‐ AUX 1 Higgh Warning L‐ RX Powerr Low Warning L‐ RX Powerr High Warning L‐ Reset Com mplete L‐ MOD_NR L‐ RX CDR no ot Locked 84 84 84 54 54 54 3 4 5 1 1 1 L‐ LOS L‐ RX_NR L‐ TX CDR no ot Locked 84 84 85 85 85 85 86 88 88 88 88 88 88 88 88 89 89 89 89 89 89 89 89 90 90 90 90 90 90 90 90 91 91 91 91 91 91 91 91 92 92 92 54 54 55 55 55 55 56 58 58 58 58 58 58 58 58 59 59 59 59 59 59 59 59 5A A 5A A 5A A 5A A 5A A 5A A 5A A 5A A 5B B 5B B 5B B 5B B 5B B 5B B 5B B 5B B 5C C 5C C 5C C 6 7 0 5 6 7 0 0 1 2 3 4 5 6 7 0 1 2 3 4 5 6 7 0 1 2 3 4 5 6 7 0 1 2 3 4 5 6 7 0 1 2 1 1 5 1 1 1 16 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 L‐ TX_Fault L‐ TX_NR RESERVED L‐ Wavelenggth Unlocked L‐ TEC Fault L‐ APD Supp ply Fault RESERVED M‐ TX Poweer Low Alarm M‐ TX Poweer High Alarm M‐ TX Bias LLow Alarm M‐ TX Bias H High Alarm M‐ Vcc Low Alarm M‐ Vcc High h Alarm M‐ Temp Lo ow Alarm M‐ Temp Hi gh Alarm RESERVED RESERVED M‐ AUX 2 Lo ow Alarm M‐ AUX 2 Hiigh Alarm M‐ AUX 1 Lo ow Alarm M‐ AUX 1 Hiigh Alarm M‐ RX Poweer Low Alarm M‐ RX Poweer High Alarm M‐ TX Poweer Low Warning M‐ TX Poweer High Warning M‐ TX Bias LLow Warning M‐ TX Bias H High Warning M‐ Vcc Low Warning M‐ Vcc High h Warning M‐ Temp Lo ow Warning M‐ Temp Hi gh Warning RESERVED RESERVED M‐ AUX 2 Lo ow Warning M‐ AUX 2 Hiigh Warning M‐ AUX 1 Lo ow Warning M‐ AUX 1 Hiigh Warning M‐ RX Poweer Low Warning M‐ RX Poweer High Warning M‐ Reset Co omplete M‐ MOD_NR R M‐ RX CDR n not Locked 92 92 92 5C C 5C C 5C C 3 4 5 1 1 1 M‐ LOS M‐ RX_NR M‐ TX CDR n not Locked 92 92 5C C 5C C 6 7 1 1 M‐ TX_Faultt M‐ TX_NR 1174161 Latched low TTX Power warning. Latched high TX Power warning. Latched low TTX Bias warning. Latched high TX Bias warning. Latched low V Vcc warning. Latched high Vcc warning. Latched low TTemperature warning. Latched high Temperature warning. RESERVED RESERVED Latched low A AUX2 monitor warning. Latched high AUX2 monitor warning. Latched low A AUX1 monitor warning. Latched high AUX1 monitor warning. Latched low RX Power warning. Latched high RX Power warning. Latched Reseet Complete Flag Latched Mirror of MOD_NR pin Latched RX C CDR Loss of Lock Latched mirror of LOS pin (RX optical loss of signal) NR Status Latched RX_N Latched TX CDR Loss of Lock Latched Lase r Fault condition. Generrated by laser safety ssystem. Latched TX_N NR Status. RESERVED Latched Wavvelength Unlocked Condiition Latched TEC FFault Latched APD Supply Fault RESERVED Masking bit ffor low TX Power alarm. Masking bit ffor high TX Power alarm. Masking bit ffor low TX Bias alarm. Masking bit ffor high TX Bias alarm. Masking bit ffor low Vcc alarm. Masking bit ffor high Vcc alarm. Masking bit ffor low Temperature alarm. Masking bit ffor high Temperature alaarm. RESERVED RESERVED Masking bit ffor low AUX2 monitor alaarm. Masking bit ffor high AUX2 monitor al arm. Masking bit ffor low AUX1 monitor alaarm. Masking bit ffor high AUX1 monitor al arm. Masking bit ffor low RX Power alarm. Masking bit ffor high RX Power alarm.. Masking bit ffor low TX Power warnin ng. Masking bit ffor high TX Power warnin ng. Masking bit ffor low TX Bias warning. Masking bit ffor high TX Bias warning. Masking bit ffor low Vcc warning. Masking bit ffor high Vcc warning. Masking bit ffor low Temperature warning. Masking bit ffor high Temperature waarning. RESERVED RESERVED Masking bit ffor low AUX2 monitor waarning. Masking bit ffor high AUX2 monitor w warning. Masking bit ffor low AUX1 monitor waarning. Masking bit ffor high AUX1 monitor w warning. Masking bit ffor low RX Power warnin ng. Masking bit ffor high RX Power warnin ng. Masking bit ffor Reset Complete Flag Masking bit ffor Mirror of MOD‐NR pin n Masking bit ffor RX CDR Loss of Lock Masking bit ffor mirror of LOS pin (RX optical loss of signal ) Masking bit ffor RX_NR Status Masking bit ffor TX CDR Loss of Lock Masking bit ffor Laser Fault condition. Generated byy laser safety system. Masking bit ffor TX_NR Status FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE N NA N NA FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE 0 0 0 0 0 0 0 0 NA NA 0 0 0 0 0 0 0 0 0 FALSE FALSE FALSE 0 0 0 FALSE FALSE N NA FALSE FALSE FALSE N NA FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE N NA N NA FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE N NA N NA FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE 0 0 NA 0 0 0 NA 0 0 0 0 0 0 0 0 NA NA 0 0 0 0 0 0 0 0 0 0 0 0 0 0 NA NA 0 0 0 0 0 0 0 0 0 FALSE FALSE FALSE 0 0 0 FALSE FALSE 0 0 Rev.: A02 2 Page 155 of 24 This doccument contains prroprietary and confidential informatiion to Finisar Corpp. This document and the entire infoormation contained herein, and any other tangible reprresentation thereoff, is not to be copiied, reproduced, duuplicated, distributted, or modified d, in whole or in paart, and/or used wiithout the expresseed written consentt of Finisar Corp. Printed copy c may not be b the latest rev vision please rrefer to Agile fo for current revission Finisar FTLX X3815M3xx DW WDM XFP Pro oduct Specificaation – Decembber 2013 EEPR ROM (Tablle A0h) conttinued 93 5D D 0 5 RESERVED 93 93 93 94 96 97 5D D 5D D 5D D 5EE 60 0 61 1 5 6 7 0 0 0 1 1 1 16 8 8 M‐ Wavelength Unlocked M‐ TEC Fault M‐ APD Sup pply Fault RESERVED Temperatu ure MSB Temperatu ure LSB 98 62 2 0 8 Vcc MSB 99 100 101 102 103 104 105 63 3 64 4 65 5 66 6 67 7 68 8 69 9 0 0 0 0 0 0 0 8 8 8 8 8 8 8 Vcc LSB TX Bias MSB B TX Bias LSB B TX Power M MSB TX Power LLSB RX Power M MSB RX Power LLSB 106 6A A 0 8 AUX 1 MSB 107 6B B 0 8 AUX 1 LSB 108 6C C 0 8 AUX 2 MSB 109 6D D 0 8 AUX 2 LSB 110 6EE 0 1 Data_Not_R Ready 110 110 6EE 6EE 1 2 1 1 LOS Interrupt 110 6EE 3 1 Soft P_Dow wn 110 6EE 4 1 P_Down State 110 6EE 5 1 MOD_NR Sttate RESERVED Masking bitt for Wavelength Unlockked Condition Masking bitt for TEC Fault Masking bitt for APD Supply Fault RESERVED measured module tempeerature Internally m Internally m measured module tempeerature Internally m measured supply voltagee in transceiver measured supply voltagee in Internally m transceiver measured TX Bias Curren nt Internally m Internally m measured TX Bias Curren nt Measured TTX output power Measured TTX output power Measured R RX output power Measured R RX output power Auxiliary measurement 1 defined i n Byte 222 Page 01h Auxiliary measurement 1 defined i n Byte 222 Page 01h Auxiliary measurement 2 defined i n Byte 222 Page 01h Auxiliary measurement 2 defined i n Byte 222 Page 01h Indicates transceiver has achieved power up and data is ready. Bit remains high until data be read at which time th he device is ready to b sets the bit low. Indicates Optical Loss of Signal (perr relevant optical link standard). Updated within 100msec of change on pin Digital statee of the Interrupt outputt pin Read/write bit that allows the mod dule to be he power down mode. TThis is placed in th identical to the P_Down hardware pin function except that it does not inittiate a system reseet Digital statee of the P_Down Pin. Up pdated within 100m msec of change on pin Digital statee of the MOD_NR Pin. Up pdated within 100m msec of change on pin 110 6EE 6 1 Soft TX Disaable 110 111 111 6EE 6F 6F 7 0 3 1 3 1 TX Disable State RESERVED RX_CDR not Locked 111 111 6F 6F 4 5 1 1 RX_NR Statte TX_CDR nott Locked 111 6F 6 1 TX_Fault Sttate 111 112 6F 70 0 7 0 1 TX_NR Statte 48 RESERVED Read/write bit that allows softwaree disable of laser. Wrriting '1' disables laser. TTurn on/off time is 100m msec max from acknowl edgement of serial bytte transmission. This bitt is "OR"d with the hard TX_DISABLE pin valuee. Note, A TX_DISABLE pin is defaault per SFP MSA enabled unless pulled low by hardw ware. If d, the Soft TX Disaable is not implemented transceiver ignores the value of thi s bit. wer up value is 0. Default pow Digital statee of the TX Disable Inputt Pin. Updated wi thin 100msec of change on pin RESERVED DR Identifies Loss of Lock in RX path CD Not Ready condition as specific to Identifies N the TX path DR Identifies Loss of Lock in TX path CD Identifies Laser fault conditoin (Ge nerated by laser safety system) Not Ready condition as specific to Identifies N the TX path RESERVED 118 118 119 123 127 76 6 76 6 77 7 7B B 7F 0 1 0 0 0 1 7 32 32 8 Error Checking RESERVED Password Location of Entry of New Optional P word Location forr Entry of Optional Passw Entry Locati on for Table Select Bytee 1174161 Error Checkking RESERVED New Passw word Entry Password EEntry Table Selecct NA NA FFALSE F FALSE F FALSE NA 0 0 0 0 0 NA 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 FFALSE F FALSE 0 0 F FALSE 0 F FALSE 0 F FALSE 0 0 0 F FALSE 0 F FALSE 0 FFALSE F FALSE 0 0 F FALSE 0 FFALSE NA Packet erro or checking not sup pported NA 0 0 1 0 NA 0 NA 00 00 00 00 00 00 00 00 1 Rev.: A02 2 Page 166 of 24 This doccument contains prroprietary and confidential informatiion to Finisar Corpp. This document and the entire infoormation contained herein, and any other tangible reprresentation thereoff, is not to be copiied, reproduced, duuplicated, distributted, or modified d, in whole or in paart, and/or used wiithout the expresseed written consentt of Finisar Corp. Printed copy c may not be b the latest rev vision please rrefer to Agile fo for current revission Finisar FTLX X3815M3xx DW WDM XFP Pro oduct Specificaation – Decembber 2013 EEPR ROM (Tablle 01h) Byte Bit Addr Hexx LSB Size Name 128 80 0 0 8 Identifier 129 81 1 0 3 RESERVED Description n Type of serrial transceiver RESERVED 129 129 129 129 130 131 131 131 131 131 131 131 131 132 132 132 132 132 133 134 134 134 134 134 134 134 134 135 135 135 135 135 135 135 136 136 136 136 136 136 136 136 137 137 137 137 137 137 137 137 138 138 138 138 139 139 139 139 139 139 139 140 141 81 1 81 1 81 1 81 1 82 2 83 3 83 3 83 3 83 3 83 3 83 3 83 3 83 3 84 4 84 4 84 4 84 4 84 4 85 5 86 6 86 6 86 6 86 6 86 6 86 6 86 6 86 6 87 7 87 7 87 7 87 7 87 7 87 7 87 7 88 8 88 8 88 8 88 8 88 8 88 8 88 8 88 8 89 9 89 9 89 9 89 9 89 9 89 9 89 9 89 9 8A A 8A A 8A A 8A A 8B B 8B B 8B B 8B B 8B B 8B B 8B B 8C C 8D D 3 4 5 6 0 0 1 2 3 4 5 6 7 0 4 5 6 7 0 0 1 2 3 4 5 6 7 0 2 3 4 5 6 7 0 1 2 3 4 5 6 7 0 1 2 3 4 5 6 7 0 5 6 7 0 2 3 4 5 6 7 0 0 1 1 1 2 8 1 1 1 1 1 1 1 1 4 1 1 1 1 8 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 5 1 1 1 2 1 1 1 1 1 1 8 8 CLEI code p present in Table 02h TX Ref Clocck Input Required Module wi th CDR Ext.Identifier Connector RESERVED 10GBASE‐EW 10GBASE‐LW W 10GBASE‐SW 10GBASE‐LRM 10GBASE‐ER 10GBASE‐LR 10GBASE‐SR RESERVED Intermediaate Reach 1300 nm FP Extented R Reach 1550 nm 1200‐SM‐LLL‐L 1200‐MX‐SN‐I RESERVED RESERVED OC‐48‐LR OC‐48‐IR OC‐48‐SR 2xFC SMF 2xFC MMF 1000BASE‐LLX/1xFC SMF 1000BASE‐SSX/1xFC MMF RESERVED I‐64.5 I‐64.3 I‐64.2 I‐64.2r I‐64.1 I‐64.1r RESERVED S‐64.5b S‐64.5a S‐64.3b S‐64.3a S‐64.2c S‐64.2a S‐64.1 RESERVED DWDM G.959.1 P1LL1‐2D2 L‐64.3 L‐64.2c L‐64.2b L‐64.2a L‐64.1 RESERVED V‐64.3 V‐64.2b V‐64.2a RESERVED Tx Dither Supported RZ NRZ Sonet Scram mbled 8B/10B 64B/66B BR, minimu um BR, maximum CLEI code p present in Table 02h TX Ref Clocck Input Required Module witth CDR Defines Mo odule Power Class Code for co onnector type RESERVED 10GBASE‐EW W 10GBASE‐LW W 10GBASE‐SW W 10GBASE‐LR RM 10GBASE‐ER R 10GBASE‐LR R 10GBASE‐SR R RESERVED Intermediaate Reach 1300 nm FP Extented Reeach 1550 nm 1200‐SM‐LLL‐L 1200‐MX‐SN N‐I RESERVED RESERVED Lower speeed link compliance code Lower speeed link compliance code Lower speeed link compliance code Lower speeed link compliance code Lower speeed link compliance code Lower speeed link compliance code Lower speeed link compliance code RESERVED Sonet code s Sonet code s Sonet code s Sonet code s Sonet code s Sonet code s RESERVED Sonet Shortt Haul Link codes Sonet Shortt Haul Link codes Sonet Shortt Haul Link codes Sonet Shortt Haul Link codes Sonet Shortt Haul Link codes Sonet Shortt Haul Link codes Sonet Shortt Haul Link codes RESERVED DWDM Sonet Long Haul Link codes Sonet Long Haul Link codes Sonet Long Haul Link codes Sonet Long Haul Link codes Sonet Long Haul Link codes Sonet Long Haul Link codes RESERVED Sonet Very Long Haul Link codes Sonet Very Long Haul Link codes Sonet Very Long Haul Link codes RESERVED 142 8EE 0 8 Length(SMF)‐km 143 8FF 0 8 Length(EMM‐50um)‐meter LENGTH (STTANDARD SINGLE MODE FIBER)‐KM LENGTH (EX XTENDED BANDWIDTH 50 um MULTIMOD DE FIBER) (/2m) 1174161 upport Encoding Su Encoding Su upport Encoding Su upport Encoding Su upport Encoding Su upport Minimum SSupported Bitrate (/100M Mb) MaximumSSupported Bitrate (/100M Mb) Value V XFP NA No CLEI code present in Taable 02h Not Required with CDR Power le vel 3 ( < 3.5W ) LC NA FALSE FALSE FALSE FALSE FALSE FALSE FALSE NA FALSE FALSE FALSE FALSE NA NA FALSE FALSE FALSE FALSE FALSE FALSE FALSE NA FALSE FALSE FALSE FALSE FALSE FALSE NA FALSE FALSE FALSE FALSE FALSE FALSE FALSE NA FALSE TRUE FALSE FALSE FALSE FALSE FALSE NA FALSE FALSE FALSE NA TRUE FALSE TRUE TRUE TRUE TRUE 99 113 He ex Value 6 NA 80 50 0 0 0 1 0 2 7 NA 0 0 0 0 0 0 0 NA 0 0 0 0 NA NA 0 0 0 0 0 0 0 NA 0 0 0 0 0 0 NA 0 0 0 0 0 0 0 NA 0 1 0 0 0 0 0 NA 0 0 0 NA 1 0 1 1 1 1 63 71 Rev.: A02 2 Page 177 of 24 This doccument contains prroprietary and confidential informatiion to Finisar Corpp. This document and the entire infoormation contained herein, and any other tangible reprresentation thereoff, is not to be copiied, reproduced, duuplicated, distributted, or modified d, in whole or in paart, and/or used wiithout the expresseed written consentt of Finisar Corp. Printed copy c may not be b the latest rev vision please rrefer to Agile fo for current revission Finisar FTLX X3815M3xx DW WDM XFP Pro oduct Specificaation – Decembber 2013 EEPR ROM (Tablle 01h) conttinued 144 90 0 8 Length(50)‐m meter 145 146 147 147 147 147 147 91 92 93 93 93 93 93 0 0 0 1 2 3 4 8 8 1 1 1 1 4 Length(62.5))‐meter Length(Copp per)‐km Tunable Tran nsmitter Detector Typ pe Cooled Transmitter Wavelength Control Transmitter Technology 148 164 164 164 164 164 164 164 164 165 168 94 A4 A4 A4 A4 A4 A4 A4 A4 A5 A8 0 0 1 2 3 4 5 6 7 0 0 128 1 1 1 1 1 1 1 1 24 128 184 B8 0 16 Vendor Rev 186 BA 0 16 Wavelength 188 190 191 BC BE BF 0 0 0 16 Wavelength Tolerance 8 Max Case Teemp 8 CC_BASE 192 C0 0 8 Maximum Po ower 193 C1 0 8 Max Power iin Power Down Mode 194 C2 0 4 Max Currentt +3.3v 194 C2 4 4 Max Currentt +5v 195 C3 0 4 Max Currentt ‐5v 195 196 C3 C4 4 0 4 Max Currentt +1.8v 128 Vendor SN 212 D4 0 16 Date Code ‐ Year 214 216 D6 D8 0 0 16 Date Code ‐ Month 16 Date Code ‐ Day 218 220 220 220 220 221 221 221 221 221 221 221 221 222 222 223 DA DC DC DC DC DD DD DD DD DD DD DD DD DE DE DF 0 0 3 4 5 0 1 2 3 4 5 6 7 0 4 0 16 3 1 1 3 1 1 1 1 1 1 1 1 4 4 8 224 E0 0 256 Vendor Speccific 1174161 Vendor Nam me XFI Loopback Supported Lineside Loo opback Mode Supported RESERVED CDR supportt for 11.1 Gb/s CDR supportt for 10.7 Gb/s CDR supportt for 10.5 Gb/s CDR supportt for 10.3 Gb/s CDR supportt for 9.95 Gb/s Vendor OUI Vendor PN Date Code ‐ Vendor specific lot code RESERVED ower meas. Type Received po FEC BER support AUX3 (Finisaar) Optional CM MU support mode Wavelength Tunability implemented d Active FEC co ontrol function umplemeented Support VPSS bypass regulator mode Suport VPS LLV regulator mode Soft P_Down n Soft TX_DISA ABLE Variable Pow wer Supply Support Aux A/D Inp put 2 Aux A/D Inp put 1 CC_EXT LENGTH (50 UM M MULTIMODE FIBER) (/1m meter) LENGTH (62.5 U UM MULTIMODE FIBER)(/1meteer) LENGTH (COPP PER) (/1meter) Device Techno ology Device Techno ology Device Techno ology Device Techno ology Device Techno ology 0 0 0 0 FALSEE APD TRUEE FALSEE 1550 nm EML 0 0 0 1 1 0 7 46 69 6E 69 73 61 72 20 20 20 20 20 20 20 20 20 1 0 NA 1 1 1 1 1 00 90 65 5 Variablee Finisaar Vendor Name (ascii) TRUEE CDR support FALSEE CDR support NA RESERVED TRUEE CDR support TRUEE CDR support TRUEE CDR support TRUEE CDR support TRUEE CDR support 00 90 65h (36965 5 Decimal) SFP vendor IEEEE company ID Part number provided by vendor (ASCII) FTLX3815M M3xx Revision level for part number provideed by vendor (ASCII) 0 Nominal laser wavelength Variable (Wavelength=vvalue/20 in nm) Guaranteed range of laser wavelength (+/‐ ominal wavelength. value) from No 20 (Wavelength TTol. = value/200 in nm) MAXIMUM CASSE TEMPERATURE 70 Checksum (128 8 to 190) Maximum Pow wer Dissipation, Max pow wer is 8 175 bit value * 20 m mW. Maximum Totaal Power Dissipation in Power Down Mode, M Max Power is 8 bit value ** 10 mW. 150 Maximum currrent required by +3.3V Su upply. Max current is 4 bit value * 100 mA. 8 Maximum currrent required by +5V Supply.Max current is 4 bit value * 50 m mA. [500 mA max] 9 Maximum currrent required by ‐5.2V Supply.Max current is 4 bit value * 50 m mA. 0 [500 mA max] upply. Maximum currrent required by +1.8V Su Max current is 4 bit value * 100 mA. 0 Serial number provided by vendor (ASC CII) Variable Two low orderr digits of year (00 = 2000)) ‐ Variable ASCII code Digits of month (01=JAN ~ 12=DEC) ‐ ASCII Variable code 01‐31) ‐ ASCII code Variable Digits of day (0 Vendor specifiic lot code, may be left blank ‐ ASCII code 0 RESERVED NA ons Special functio Average power Special functio ons FALSEE Aux3 minitor ( 1612 only) RESERVED Enhanced Optiions FALSEE Enhanced Optiions FALSEE Enhanced Optiions TRUEE Enhanced Optiions FALSEE Enhanced Optiions FALSEE Enhanced Optiions TRUEE Enhanced Optiions TRUEE Enhanced Optiions FALSEE Enhanced Optiions +3.3V Supply Voltage Enhanced Optiions Laser Tempeerature Check code forr bytes 192 to 222 Vendor Specific EEPROM 0 Variablee Variablee 00 14 46 Variablee AF 96 8 9 0 0 Variablee Variablee Variablee Variablee 0 NA 1 0 0 0 0 1 0 0 1 1 0 7 4 Variablee 00000000000 00000 00000000000 00000 00000000000 00000 00000000000 00000 0000 Rev.: A02 2 Page 18 of 24 This doccument contains prroprietary and confidential informatiion to Finisar Corpp. This document and the entire infoormation contained herein, and any other tangible reprresentation thereoff, is not to be copiied, reproduced, duuplicated, distributted, or modified d, in whole or in paart, and/or used wiithout the expresseed written consentt of Finisar Corp. Printed copy c may not be b the latest rev vision please rrefer to Agile fo for current revission FTLX X3815M3xx DW WDM XFP Pro oduct Specificaation – Decembber 2013 Finisar EEPR ROM (Tablle 02h) Filled witth “00” unlesss otherwisee specified byy customer rrequirementss. IX. Mechaniccal Specifications Finisar’s XFP traansceivers arre compliant with the dim mensions defined by the XFP Multi-Sourccing Agreem ment (MSA). 77.95 22.15 18.35 13.30 8.50 LATCHED 1.95 16.00 U UNLATCHED D 2 20.85 39.00 R1..00 XF FP Transceiveer (dimensionss are in mm) 1174161 Rev.: A02 2 Page 199 of 24 This doccument contains prroprietary and confidential informatiion to Finisar Corpp. This document and the entire infoormation contained herein, and any other tangible reprresentation thereoff, is not to be copiied, reproduced, duuplicated, distributted, or modified d, in whole or in paart, and/or used wiithout the expresseed written consentt of Finisar Corp. Printed copy c may not be b the latest rev vision please rrefer to Agile fo for current revission FTLX X3815M3xx DW WDM XFP Pro oduct Specificaation – Decembber 2013 X. Finisar PCB Lay yout and Bezzel Recomm mendations XFP Host Bo oard Mechaniical Layout (d dimensions aree in mm) 1174161 Rev.: A02 2 Page 200 of 24 This doccument contains prroprietary and confidential informatiion to Finisar Corpp. This document and the entire infoormation contained herein, and any other tangible reprresentation thereoff, is not to be copiied, reproduced, duuplicated, distributted, or modified d, in whole or in paart, and/or used wiithout the expresseed written consentt of Finisar Corp. Printed copy c may not be b the latest rev vision please rrefer to Agile fo for current revission FTLX X3815M3xx DW WDM XFP Pro oduct Specificaation – Decembber 2013 Finisar XF FP Detail Host Board Mech hanical Layoutt (dimensions are in mm) 1174161 Rev.: A02 2 Page 21 of 24 This doccument contains prroprietary and confidential informatiion to Finisar Corpp. This document and the entire infoormation contained herein, and any other tangible reprresentation thereoff, is not to be copiied, reproduced, duuplicated, distributted, or modified d, in whole or in paart, and/or used wiithout the expresseed written consentt of Finisar Corp. Printed copy c may not be b the latest rev vision please rrefer to Agile fo for current revission FTLX X3815M3xx DW WDM XFP Pro oduct Specificaation – Decembber 2013 Finisar XFP Recom mmended Bezzel Design (dim mensions are iin mm) 1174161 Rev.: A02 2 Page 222 of 24 This doccument contains prroprietary and confidential informatiion to Finisar Corpp. This document and the entire infoormation contained herein, and any other tangible reprresentation thereoff, is not to be copiied, reproduced, duuplicated, distributted, or modified d, in whole or in paart, and/or used wiithout the expresseed written consentt of Finisar Corp. Printed copy c may not be b the latest rev vision please rrefer to Agile fo for current revission FTLX X3815M3xx DW WDM XFP Pro oduct Specificaation – Decembber 2013 Finisar XI. Notes & Ex xceptions • The FTLX X3815 produ uct family haas the follow wing exceptioons to the X XFP MSA; o In nitialize time of 2 sec maaximum (MS SA requires 3300ms). • XFI loopb back operation: o When W XFI Loopback is en nabled, the T Transmitter ooutput is disaabled. o When W Line Lo oopback is en nabled, the R Receiver inpput is disableed. • o req quires config guration channge via I2C vvendor reserrved 8.5Gb/s operation command d. XII. Referencces 1. 10 Gigabiit Small Forrm Factor Plu uggable Moodule (XFP) Multi-Sourcce Agreemennt (MSA), Rev R 4.5 – August 20 005. Docum mentation iss currently available aat http://ww ww.xfpmsa.orrg/ 2. Applicatio on Note AN N-2035: “Diigital Diagnnostic Monittoring Interfface for XF FP Optical Transceivers”” – Finisar Corporation, C December 22003 3. Directive 2002/95/EC C of the Eu uropean Couuncil Parliam ment and off the Counciil, “on the restriction r off the use off certain hazzardous subbstances in eelectrical annd electronicc equipment””. January 27 7, 2003. 4. “Applicattion Note AN N-2038: Finiisar Implemeentation Of R RoHS Comppliant Transceiv vers”, Finisarr Corporatio on, January 221, 2005. 1174161 Rev.: A02 2 Page 233 of 24 This doccument contains prroprietary and confidential informatiion to Finisar Corpp. This document and the entire infoormation contained herein, and any other tangible reprresentation thereoff, is not to be copiied, reproduced, duuplicated, distributted, or modified d, in whole or in paart, and/or used wiithout the expresseed written consentt of Finisar Corp. Printed copy c may not be b the latest rev vision please rrefer to Agile fo for current revission FTLX X3815M3xx DW WDM XFP Pro oduct Specificaation – Decembber 2013 Finisar XIII.. Product Selection S Deetails FTLX381 15M3xx FT: FT Seeries L: RoHS--6 X: 10G Bit B Rate Class 38: 80km (asymmetriic chirp) 1: XFP fo orm factor 5: Standarrd Performan nce Class M: Multip protocol 3: Commeercial tempeerature rangee xx: Sub-B Band start ch hannel (pleasse refer to paage 6 for chaannel definittion) XIV.. Revision History vision Rev Date A00 A 8/15/2012 Prelimin nary document created A01 A 10/22/2012 Update EEPROM E Tablle A0h and 01hh A02 A 10/31/2012 Include cold c start timinng, correct initiialization timinng, SBS/Ditherr Byte XV. Descrip ption For moree informatio on Finisar Corporatiion 1389 Moffett Parrk Drive nyvale, CA 94089-1133 9 Sunn 000 Tel. 1-408-548-1 1 Fax 1-408-541-6 1 138 sales@ @finisar.com m www w.finisar.com m 1174161 Rev.: A02 2 Page 244 of 24 This doccument contains prroprietary and confidential informatiion to Finisar Corpp. This document and the entire infoormation contained herein, and any other tangible reprresentation thereoff, is not to be copiied, reproduced, duuplicated, distributted, or modified d, in whole or in paart, and/or used wiithout the expresseed written consentt of Finisar Corp. Printed copy c may not be b the latest rev vision please rrefer to Agile fo for current revission