Download Hobbico Mini Switch

ASSEMBLE THE MODEL
Install the Tail Section
❏ 3.
Use two 3 x 30 mm machine screws to secure the
stabilizer in place.
Setting Up the High Wing Configuration
We recommend flying the Mini Switch first in the high wing
configuration. The high wing position will make the orientation
of the airplane more visible at high altitudes.
❏ 1. Slide the horizontal stabilizer between the tail pushrods
and the stabilizer pocket. You will need to slightly flex the
pushrods in order get the stabilizer in position.
❏ 1. Connect the clevises on the pushrods to the outer holes
❏ 2. When
fitting the horizontal stabilizer into the pocket,
guide the tail wheel tiller arm through the plastic hoop on the
underside of the rudder.
in the elevator and rudder control horns. Squeeze the ends
of the clevises to ensure they are snapped together properly.
5