Download Adaptec RAID 6405
Transcript
Chapter 11: Solving Problems Error Error Message Text ChangeLogicalName Could not change the name of the specified logical drive ChangeNtpServer Could not update the specified NTP server ChangeTimeDate Could not change the date and time ChgAlarm Could not change the alarm setting ChgDataScrubRate Could not change the background consistency check rate ChgRebuildRate Could not change the rebuild rate ChgSCSIXferSpeed Could not change the SCSI transfer speed ChgStripeSize Could not change the specified stripe size ChgTaskPriority Could not change task priority ClearAdapterLogsFail Could not clear the event logs for the specified system ● ClearEnclosureLogsFail Could not clear the event logs for specified enclosure ClearHardDrive Clear failed to start for the specified disk drive CommFailure You must re-establish communication with specified system CommFailure1 Restart the Adaptec Storage Manager Agent to establish communication with the local system ControllerRescan Could not rescan for the specified controller ControllerRestart Could not restart the specified controller ControllerShutDown Could not shut down the specified controller CreateDiskSet Could not create the diskset CreateLDError There was an error creating specified logical drive CreateSimpleVolume Could not create a simple volume DataScrub Could not change the background consistency check mode DDDAdInternal Failed drive—Controller internal failure DDDDeviceNotFound Failed drive—Device not found DDDDeviceNotReady Failed drive—Specified device will not come ready DDDDriveAddedToSystem Failed drive—Specified disk drive added to server DDDDriveNotBelong1 Failed drive—Specified disk drive does not belong DDDDriveNotBelong2 Failed drive—Specified disk drive does not belong DDDDriveNotFound Failed drive—Specified disk drive not found DDDDriveNotPartOfCluster Failed drive—Specified disk drive is not part of the cluster 144