Download Adaptec RAID 6405

Chapter 11: Solving Problems
●
Understanding Error and Warning Messages
This section provides detailed information about error and warning events that occur in Adaptec Storage Manager.
Warning Messages
Warning
Warning Message Text
ArrayCritical
Ready disk drives are still available
HotSpareTooSmall
The hot spare is too small to protect the specified array
HotSpareWontWork
At least one logical drive is not protected by the specified hot spare
InitLD
Hot spare is too small for use by at least one array
NoService
The specified logical drive was not initialized
SyncLD
Could not contact Adaptec Storage Manager Agent. Adaptec Storage Manager may not function correctly.
Please start the Agent.
Error Messages
Error
Error Message Text
AbortTask
Could not stop the specified currently running task
AccessControl
Could not write the logical drive access control list
AddToDiskSet
Could not add drives to the specified diskset
AgentRemoved
Could not remove the specified Agent
ArrayInUse
Could not delete the specified array. One or more initiators are logged into a logical drive(s)
contained within this array
ArraysInUse
Could not delete all of the specified arrays. One or more initiators are logged into a logical
drive(s) contained within this array
BreakRemoteMirror
Could not break the specified remote mirror facet
CalibrateBatteryController
Could not recalibrate the specified battery
ChangeArraylName
Could not change the name of the specified array
ChangeBIOSMode
Could not change the BIOS-compatibility mapping
ChangeDiskSetName
Could not change the name of diskset
ChangeLogicalLun
Could not change the LUN of the specified logical drive
143