Download X-Rite 504 SpectroDensitometer

INSTRUMENT
FUNCTIONS
To measure paper:
1. If not selected, press the Tab Up key $ or Tab Down
key @ to highlight Paper. <Measure Paper>
appears in the user dialog. The paper values
displayed are the current values set in the instrument.
2. Center the instrument target window over a sample of
the paper, and lower the instrument to take a reading.
The paper values are updated and the display
highlight advances to Solid.
NOTE: If HiFi status is used, press the Enter key # when Paper is
highlighted to view the RGBO values.
Measuring Print Contrast Procedure
So far, you have performed the procedures to select the print
contrast mode, options, and to measure paper.
You are now ready to begin taking measurements to monitor
printing density. The measurement data that displays depends
on the way you set up your instrument earlier, and the print
contrast mode selected. The instrument maintains separate
data for each of the colors (vcmyrgbo).
PRINT CONTR
Paper
Solid
Tint
PC
Options
V 0.00
<Measure Solid>
T
To perform a print contrast measurement:
NOTE: If the highlight in the measurement list changes to an
incorrect item after a measurement, use the $@ keys to move the
highlight to the correct item before releasing the instrument.
1. If not selected, press the Tab Up key $ or Tab Down
key @ to highlight Solid. <Measure Solid>
appears in the user dialog.
2. Center the instrument target window over the solid
patch, and lower the instrument to take a reading. The
solid value is updated and the display highlight
advances to Tint.
5-39