Download Manual - Renogy
Transcript
4.2 RENOGY Rail Mount System The RENOGY Rail Mounting System is not only available for large 24V panels, but also available for smaller 12V panels such as the RENOGY 70W and 100W modules. Figure 4.12 RNG-100D with Rail Mount For roofs with asphalt shingles, RENOGY offers: Mid-clamps End-clamps for 12V panels L-feet Quick Mount PV ® Flush mounts 5 and 10 ft. rails Splices Mid-clamp End-clamp L-feet Rails Figure 4.13 Rail Mount components Rail Mounting offers the capability of mounting multiple solar panels side by side. If greater length is necessary, the 5 ft. and 10 ft. rails can be extended with splices. Keep in mind that the thickness of each solar module is different; therefore, the correct End-clamp must be ordered. 4.3 RENOGY Single panel pole mount system RENOGY offers a single panel pole mount system for 4” diameter poles. This mounting system is compatible with all Renogy 12V solar panels including the RNG-50D, RNG-50P, RNG-70P, RNG-100D and RNG-100P. Copyright © 2014 Renogy. All Rights Reserved. 9