Download DAC700 - Satcom Resources Web Log

Transcript
RD
Receive Channel Rate
Use this command to set or read the receive channel rate operation for the decoder.
The Receive Channel Rate should be the same as the Transmit Channel Rate (TD).
Syntax
RD <parameter>
RD ?
Parameters
Valid <parameters> are:
RE
56000
64000
96000
112000
128000 (default)
192000
256000
384000
Resets the Unit
Use this command to reset all of the hardware on the DAC700.
Syntax
RE
Parameters
The following volatile parameters are set:
AT 0
CO XXXXXXXX
CF 0
LB 2
Additional Information
Issuing an RE command is the same as power cycling the unit. All volatile
parameters will be reset to the their default state. All nonvolatile parameters
remain unchanged.
Remote Monitor and Control Operation
4-21