Download LPOD-R manual - Comtech EF Data

LPOD-R Outdoor Amplifier / Block Up Converter (BUC)
Optional Serial-based Remote Product Management
Parameter
Type
Retrieve
Configuration
Status (cont)
Command
(Instruction
Code and
Qualifier)
Retrieve
Equipment
Type E
N/A
Retrieve
Maintenance
Status
N/A
Arguments
for Command
or Response
to Query
22 bytes
213 bytes
alphanumeric
MN-LPODR
Revision 1
Description of Arguments
(Note that all arguments are printable ASCII characters)
Example:
<1/RCS?’cr’
>0001/RCS=’cr’
ATT=12.75’cr’
AMP=1’cr’
MUT=1’cr’
ONL=1’cr’
ESW=1’cr’
AOF=00.00’cr’
AFR=1’cr’
XRF=N/A’cr’’lf’ (see Note 2)
Notes:
1) Unused fields shall be padded with X’s.
2) XRF is always N/A when the internal reference oscillator option is not installed.
Query only.
Returns a string indicating the Model Number and the version of the installed M&C firmware.
Example: <1/RET?’cr’
>0001/RET=LPOD-R VER: 1.1.1’cr’’lf’
Query only.
Returns the maintenance status of the unit, where:
LINEV = LINE voltage
LINEA = LINE amperage
LNBVT = +13/18V LNB power supply (see Note)
P13VT = +13.5V power supply
P10V1 = +10V1 power supply
A10V1 = 10V1 on RF Module
A10V2 = 10V2 on RF Module (see Note)
P7V8T = +7.8V power supply
P5V8T = +5.8V power supply
P2V5T = +2.5V power supply
P1V2T = +1.2V power supply
N5V8T = -5.8V power supply
FAN1V = Fan 1 voltage
FAN1A = Fan 1 current
BUCVT = BUC tuning voltage (see Note)
FWPWR = Forward power in dBm
REFVT = Reference osc. tuning voltage (see Note)
LNBCS = LNB current supply in mA (see Note)
ATEMP = Heatsink temperature in Celsius
OTEMP = Outdoor temperature in Celsius (see Note)
Response to
Command
(Target to
Controller)
Query
(Instruction
Code and
Qualifier)
RET=
RET?
RET=x….x
RMS?
(See Description
of Arguments for
details)
RMS=x….x
RMS=
Response to
Query
(Target to
Controller)
(See Description
of Arguments for
details)
5–20