Download Enterasys SmartSTACK ELS10 (ELS10

Monitoring and Managing Your SmartSTACK Ethernet ELS10-27
The following statistics are available with SNMP:
¥ The number of non-unicast (multicast and broadcast) and unicast
packets received from the port.
¥ The number of bytes in the packets that were forwarded.
¥ The total number of packets transmitted to the LAN.
4.5 USING LCM TO CHECK SMARTSTACK ETHERNET
ELS10-27
The LCM commands that enable you to quickly check on the status of the
SmartSTACK Ethernet ELS10-27 include:
¥ Status
¥ Address display
¥ Ipaddr
¥ Ident
These LCM commands are described in the sections that follow.
4.5.1 Displaying Status
The status command displays the status of the SmartSTACK Ethernet
ELS10-27 and automatically pages through the status of all of the
Ethernet ports, pausing at each screen of information.
Note: You can also use the status command to display status for individual
Ethernet ports by typing status and specifying a port number.
At the LCM prompt:
Type status
4-8