Download Zhone Technologies 600 Network Card User Manual

IMUX Card
Inverse Multiplexer (IMUX) Card Settings
Table 7-1. IMUX Card Main Screen Options and Defaults
Parameter
STATE
DIRECTION
WAN
MAIN CHANNEL
N-CHANNELS
BONDING MODE
LAST DISC.
User Options
idle busy
out in
w1-1 w1-2 w2-1
01-23 01-30 99
01-23 01-30 00
00-01
01-12 00
w2-2
w3-1
w3-2
w4-1
w4-2
STATE
The State parameter shows the activity on this IMUX engine (port). The values are idle or
busy.
DIRECTION
The Direction parameter shows the direction of a busy circuit. The values are out (a call
originated from this location to another) or in (a call originated from another location).
WAN
The WAN parameter shows the WAN link used by the busy circuit. The values for this setting
are w1-1 through w4-2.
MAIN CHANNEL
The Main Channel parameter shows the timeslot on the WAN link shown on the previous
setting that is used for the call to the IMUX primary number or hunt number for this call.
Values for this setting are 1-24 for T1 systems or 1-31 for E1 systems. The value 99 is used
for unassigned engines.
N-CHANNELS
The N-Channels parameter shows the number of additional timeslots needed to complete the
IMUX call. The values for this setting are 1-23 for T1 systems and 1-30 for E1 systems. The
value 00 is used for unassigned engines.
Server Cards
7-3