Download Netopia 4000-Series Network Router User Manual

IP Setup 6-35
Main
Menu
IP
Setup
System Configuration
By default, Multicast Forwarding is tuned off (None). You enable the router to transmit multicast data by
selecting Tx. from the pull-down menu.
IP Setup
Ethernet IP Address:
Ethernet Subnet Mask:
Define Additional Subnets...
192.168.1.1
255.255.255.0
Default IP Gateway:
Backup IP Gateway:
Primary Domain Name Server:
Secondary Domain Name Server:
Domain Name:
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
Receive RIP...
Transmit RIP...
Multicast Forwarding...
IGMP Version...
Static Routes...
Both
+----------------+
+----------------+
| None
|
| Tx.
|
+----------------+
IP Address Serving...
If you enable Multicast Forwarding, you will see a new option IGMP Version. This lets you choose V1 or V2. If
you know you will be communicating with other hosts that are limited to V1, select V1; otherwise, allow the
default V2.
Navigate to the IP Profile Parameters screen.
Main
Menu
WAN Configuration
Add/Display/Change
Connection Profile