Download Lucent Technologies R5SI Computer Hardware User Manual

The Custom Configuration Menu
4-13
Program Settings
Using
This field shows the program-settings file that
will be used. If you do not want to load any
program settings, turn the switch off.
Comm Settings
Select this option to view or change serial
communications settings for the MX2. See
section titled “The Comm Settings Dialog Box”
for information.
Download
When you finish customizing the MX2
configuration, select this option to load the
custom configuration into your MX2. When
you select it, the configuration utility prepares
files to be transferred to the MX2 and opens the
Important dialog box. Make sure your MX2
unit is properly connected to the serial port
specified in the Comm Settings dialog box.
Then run the LD.BAT file on the MX2, and
select OK in the Important dialog box on the
computer.
Done
Select this option to return to the main menu.
After selecting Done and if you made any
changes to the file configuration or program
settings, one or both of the following prompts
appear:
Figure 4-6 The Prompt for Saving Changes to the Current File
Configuration
MX2A137REFGD
Revision A
MX2 Reference Guide