Download Asante Technologies 1000 Switch User Manual

book Page 10 Thursday, September 4, 1997 3:47 PM
Management
Resetting the Device
You can reset the SuperStack II Switch 1000 via one of two methods:
❏ By physically powering off the SuperStack II Switch
1000, then powering it on.
❏ Via the Slots menu in IntraSpection.
To reset the SuperStack II Switch 1000 via the Slots menu in IntraSpection:
1
2
Do not select any item on the Device Page’s front
panel image. (This selects the entire device.)
Click Slots.
The Slot Configuration Table appears, similar to Figure 4-8.
Figure 4-8
3
Click once on the row containing the group you want
to reset.
∆
4
5
6
Slot Configuration Table
Note: For a description of each field, see “Slots”
on page 6-9.
Click Modify.
The Modify Dialog box appears.
Open the Action drop-down menu and select Reset.
Click Apply.
The device is reset.
Page 4-10