Download Bizfon 2000 Installation guide

Bizfon Manual II: Administrator's Guide
Bizfon's Graphical Interface
Bizfon’s Graphical Interface
Administrator’s Main Page
As the result of logging in as an administrator, the page Bizfon Management is displayed with a table of active calls (including information about call
peers, call duration and start time) at the startup. Here the administrator may access the following settings and perform the actions:
Fig. II-1: Bizfon2000 Management
System Menu
• System Configuration Wizard
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Internet Configuration Wizard
Status
IP Routing Configuration
Configuration Management
Events
Time/Date Settings
Mail Settings
SMS Settings
Firmware Update
Networking Tools
Diagnostics
•
•
•
•
•
•
•
•
•
•
•
•
•
Telephony Menu
Call Statistics
SIP Settings
RTP Settings
NAT Traversal Settings
Line Settings
FXO Settings
Gain Control
Call Routing
VoIP Carrier Wizard
Internet Uplink Menu
LAN Services Menu
•
•
•
•
•
•
•
PPP/ PPTP Settings
VPN Configuration
Dynamic DNS Settings
DNS Settings
DHCP Settings for the LAN
Interface
Firewall and NAT
Filtering Rules
Logout
2
Users Menu
•
•
Extensions Management
Receptionist Management
RADIUS Client Settings
Voice Mail Common Settings
Dial Plan Settings
Automatic Provisioning
Features
User Rights Management
The functional button Renew Wan IP Address appears on the administrator’s main Bizfon Management page if the Bizfon device acts as a DHCP
client. The Renew WAN IP Address button is used to get a new WAN IP address in case, e.g., the Bizfon moves to another network.
The functional button Establish Your Internet Connection Now respectively Terminate Your Internet Connection Now occurs on the Bizfon
Management page if PPPoE is used as WAN interface protocol.
The link Please Check Your Pending Events will be displayed on the administrator Main Menu page if new system events exist. The link leads to
the Events page that can be also accessed from the System menu.
The list of Users currently logged into the system is seen in the lower right corner of the Administrator's Main Menu. Information about IP address
user accessed Bizfon GUI from, the username user is logged in and the time until the next automatically logout is provided herein. The idle session
timeout is set to 20 minutes. If no action is performed during that time, user will be automatically moved to the Login page and will be requested to
login again.
The link Refresh in occurs in the upper right corner beside the field displaying the number of seconds until the next refresh and is used to perform a
manual reload of the page. If a page with a Refresh counter is left opened, the session time-out counter will be updated periodically and the logout
timeout will never expire.
Bizfon2000 (SW Version 3.1.x)
5