Download Aristel AV Phone System Programming
Transcript
Sets a required password to lock or unlock the SMDR port and to reset the SOS alarm (#55) & (#57). With SMDR locked:AV8 stores 100 calls AV38 store 100 calls AV16 stores 50 calls AV24 stores 25 calls AV256 stores 250 calls or 1160 calls for EH64 Default = dddddddd Set 03. DISA Password. P-DISA Sets a required password for a DISA caller to access a relay function or a free CO line Default = ----dddd Set 04. Toll free password P-TOLL Sets a required password over-ride all Toll restrictions. Default = ----dddd Set 05. Incoming Paging Password P-PAGE This function is not available on a AV256. This function requires a Voice Service Card. Sets a required password for a DISA caller to access the Paging facility. Default = ----dddd Set 06. Reserved Passwd Reserved for a future required password Default = ----dddd Set 07. Remote Programming Password Pmodem Sets a required password for entering remote programming mode. Default = ----dddd Set 08. Headset Password P-HEAD Sets a required password for a user to enter/leave Headset mode. Default = dddddddd Related Zones. Z235, Various Zones are affected by the passwords. Zone 302 Default value = 02 Range = Relay # Relay Fun (Item = relay number) 00 00~18 AV8, AV12 = 1 relay (Item 01) AV16, AV20, AV24 & AV38 = 2 relays (Item 01 = relay 1, Item 02 = relay 2) AV256 =16 relays 4 per cabinet maximum (Items 01 to 16) This Zone sets the functions that the relay(s) will provide. 00 = No operation 01 = Music on Hold 02 = Door 1 Open 03 = Door 2 Open 04 = CO Loud Bell 05 =Station Loud Bell 06 = Sensor Alarm 07 = Remote control. The relay is operated & released via a DISA call 08 = Secret Recording 09 = Latch door relay during door call (AV12, 38 & 256 only) 10 = External All Zone Page 11 = External Zone 1 Page 12 = External Zone 2 Page 13 to 18 = External Zones 3-8 Page Related Zones. Z504 Item 4, Z604 Item 6 Zone 303 Sensor (Item = Sensor number) This Zone sets the function and operating conditions of the system sensor(s). AV8/12 (1 Sensor) Default value = 03 00 First number is the sensor function according to the chart below Second number is the Normally open/closed indicator Range = 00~18 (function) 00~01 (normal condition indicator) AV16/20/24/38 (2 Sensors) Default value = 03 00 00 00 First & second numbers are the Sensor function according to the chart Third and fourth numbers are the Normally open/closed indicator Revised by R. Robinson Issue AV1.13 8 June 2006 36