Download Sharp UP-820N Instruction manual

Transcript
15 EURO Migration Function
Basically your POS terminal can be automatically modified to correspond to the introduction of EURO by
executing the operation “EURO STATUS” in X2/Z2 mode. However, there are several options you must set
depending on your need. So, please carefully conduct necessary settings.
For details, contact your authorized SHARP dealer.
EURO status:
You can select status from following 4 types ((A), (B), (C), or (D)). And the selectable type is decided as
follows for each status. Type (A) is the base status (initial status).
Items
▲
selectable
selectable
selectable
▲ ▲
From type (A)
From type (B)
From type (C)
Type (B), (C), or (D)
Type (C), (D)
Type (D)
Type (B)
Type (C)
Type (D)
General Z1 report
ISSUE
ISSUE
ISSUE
General Z2 report
ISSUE
ISSUE
ISSUE
—
CLEAR
CLEAR
GT1/GT2/GT3 memory
Exchange1 amount printing for total and change
YES
YES
NO
Exchange1 amount printing for total validation print
YES
YES
NO
DIVISION
MULTI
MULTI
Domestic currency symbol
—
[EURO]
[EURO]
Domestic TAB
—
2
2
Conversion of preset prices of Dept./PLU/EAN*
—
YES
YES
Exchange1 calculation method
Exchange1 currency descriptor
Exchanger1 TAB
[EURO]
2
The current
domestic
currency symbol
The current
domestic TAB
—
—
The marked items “—” is remaining the current data.
*: The preset rate of the , key is applied as the conversion rate, and the calculation method is set to
“division”. When the conversion has been made, the message “PRICE CONVERTED” is printed on the
report.
224