Download Multitek Comm-Box User`s guide
Transcript
ADSL/VoIP Gateway User’s Guide Attribute Advanced DSL port attributes Value Default Activate Line Abort – deactivates the DSL link None – signifies that this parameter has been read Start – activates the DSL link None Host Control Disable – terminates any host/API interaction with the DSP (for testing purposes) Enable – enables host/API interaction with the DSP Auto Start “True” - A Connection will be established at power up. “False” - The modem will remain in Idle mode at power up. True Failsafe True – a failsafe timer is activated when a startup request is made. Once a connection has been established, the failsafe timer is disabled False – a failsafe timer is not activated when a startup request is made True PSMode Possible Values: “Inner” : Inner Pair Selected “Outer” : Outer Pair Selected This attribute is only present if Pair switching is enabled. Inner Whip Possible Values if compiled for Whip Serial: Serial or Inactive Possible Values if compiled for Whip TCP: TCP or Inactive Possible Values if compiled for Whip Serial/TCP: Serial, TCP or Inactive Inactive Whip Active Indicated state of whip. Possible values are Inactive, SerialActive and TCPActive Inactive Action An action given when ActivateLine is set to Start. Possible values are Startup, SpectrumReverb, SpectrumMedely or SpectrumPilot Startup Standard Indicates the preferred standard compliance. Multimode indicates that the device automatically detects the other end as one of the supported standards. Multimode Utopia Interface Level1 – Utopia Level 1 internal framing is used with the DSP Level2 – Utopia Level 2 internal framing is used with the DSP Level1 EC FDM Mode EC – enables Echo Cancellation. This setting is necessary if your device is connected to a high speed CO. FDM – enables Frequency Division Multiplexing EC Max Bits Per Bin The maximum number of bits per bin. This can be any value between 1 and 15 15 Tx Start Bin A value that indicates the lowest bin number allowed for transmit signal 6 Tx End Bin A value that indicates the highest bin number allowed for transmit signal 31 Rx Start Bin A value that indicates the lowest bin number allowed for receive signal 6 Rx End Bin A value that indicates the highest bin number allowed for receive signal 255 Enable 106