Download Siemens Model 240 Technical data

Parameters
List of Parameters
r7843[0...20]
Description:
Notice:
Note:
r7901[0...43]
Description:
Memory card serial number / Mem_card ser.no
Access level: 4
Calculated: -
Data type: Unsigned8
Can be changed: -
Scaling: -
Data set: -
Units group: -
Unit selection: -
Min
-
Max
-
Factory setting
-
Displays the actual serial number of the memory card.
The individual characters of the serial number are displayed in the ASCII code in the indices.
An ASCII table (excerpt) can be found, for example, in the appendix to the List Manual.
Example: displaying the serial number for a memory card:
r7843[0] = 49 dec --> ASCII characters = "1" --> serial number, character 1
r7843[1] = 49 dec --> ASCII characters = "1" --> serial number, character 2
r7843[2] = 49 dec --> ASCII characters = "1" --> serial number, character 3
r7843[3] = 57 dec --> ASCII characters = "9" --> serial number, character 4
r7843[4] = 50 dec --> ASCII characters = "2" --> serial number, character 5
r7843[5] = 51 dec --> ASCII characters = "3" --> serial number, character 6
r7843[6] = 69 dec --> ASCII characters = "E" --> serial number, character 7
r7843[7] = 0 dec --> ASCII characters = " " --> serial number, character 8
...
r7843[19] = 0 dec --> ASCII characters = " " --> serial number, character 20
r7843[20] = 0 dec
Serial number = 111923E
Sampling times / t_sample
Access level: 4
Calculated: -
Data type: FloatingPoint32
Can be changed: -
Scaling: -
Data set: -
Units group: -
Unit selection: -
Min
- [µs]
Max
- [µs]
Factory setting
- [µs]
Displays the sampling times currently present on the drive unit.
For r7901[x] = 0, the following applies: The time slice is not active.
r7903
Description:
Hardware sampling times still cannot be assigned / HW t_samp free
Access level: 3
Calculated: -
Data type: Unsigned16
Can be changed: -
Scaling: -
Data set: -
Units group: -
Unit selection: -
Min
-
Max
-
Factory setting
-
Displays the number of hardware sampling times that can still be assigned.
These free sampling times can be used by OA applications such as DCC (Drive Control Chart) or FBLOCKS (free
function blocks).
Note:
r8570[0...39]
OA: Open Architecture
Macro drive object / Macro DO
Access level: 1
Calculated: -
Data type: Unsigned32
Can be changed: -
Scaling: -
Data set: -
Units group: -
Unit selection: -
Min
-
Max
-
Factory setting
-
Description:
Displays the macro file saved in the appropriate directory on the memory card/device memory.
Dependency:
Refer to: p0015
Note:
For a value = 9999999, the following applies: The read operation is still running.
© Siemens AG 2011 All Rights Reserved
SINAMICS G120 Control Units CU240B/E-2 Parameter Manual (LH11), 01/2011
1-331