Download Agilent Technologies 16440A Technical data
Transcript
B1500A Accessories Accessories for the wafer prober / connector plate Table 2-13 Item. Item number information of 16495K Connector Plate with Universal Cable Holder Description OP Instruction 16495K Connector plate with universal cable holder 16495K does not have any connections. This plate provides the cable hole and the cover with rubber used to block the light from the cable hole. This plate will be used with the E5288A ASU or the N1301A-200 GSWU that will be installed in the shielding box. ATTENTION: Must specify 16495K-001 16495K-001 Connector plate with rubber holder The cable hole is to pass the cables from the ASU or GSWU to the instrument such as B1500A, E5270B, and so on. And the cables will be fixed to the shielding box by using the cover with rubber that will close the opening of the cable hole. Table 2-14 Connector plate overview 16495F (12 triax., Intlk, GNDU) 16495G (24 triax., Intlk, GNDU) 16495H (6 triax. 6coax., Intlk, GNDU) 16495J (8 triax. 4 coax., Intlk, GNDU) 16495K Connector Plate with Universal Cable Holder for ASU 16495K inside 2-20 Agilent B1500A Configuration and Connection Guide, Edition 5