Download Simrad AP28 System information

4 Alarm system
4.1 Alarm indication
The alarm system in the AP28 autopilot is activated if any
alarm settings are exceeded. Refer to Alarms, page 50.
When an alarm is notified, the
alarm will be indicated with an
alarm text and with an audible
alarm.
The different alarm indications are
shown in the table below.
Alarm type
Vital alarm
Important alarm
Standard alarm
Sound
Light
Alternating
between 2
tones
Switching
on/off
Warning
Single beep
Light warning
Single beep
Reminder
interval
10s
20s
40s
60s
If AP28 is connected to other
SimNet units, any alarm in the
system will be displayed on the
control unit.
If no specific alarm text is displayed, an alarm code will
appear. Refer to Alarm codes, page 100.
Alarm system | 99