Download Sartorius TS 6100B Operating instructions
Transcript
Data Output Parameters (Codes 8 1 to 8 16) Data can be transferred to the output port depending on the particular stability state of the weighing system (stability parameter: stable readouts). You can choose to have data transferred regardless of stability or only when the readout is stable. lf you opt to have data transferred only when the weighing system has stabilized, an output command will remain stored until the system has stabilized. For the auto print setting (automatic data output), weight data are transferred continuously the moment you turn on the power. lf you have additionally selected the stability parameter for this Option, only data for stable readouts will be output. To stop and start automatic data transfer, press the print key. Each signal received by the RxD line will initiate data transfer (external data request). Interfacing Devices with the Scale (RS Interface) Make sure that the interface port is electrically connected to the scale housing. The interface cable supplied as an optional accessory is shielded and must be installed so that the interface end is electrically connected to the housing. This electrical connection may result in interference caused by ground loops or by transient currents if you have grounded the housing or connected the protective grounding conductor for AC power. lf necessary, connect an equipotential bonding conductor to the scale. 33