Download Agilent Technologies N8201A Technical data

Transcript
Measurement Setup
15
Ref BW
Sets the reference bandwidth (integration bandwidth) for each offset.
Key Path:
Meas Setup, Offset Setup
State Saved:
Saved in Instrument State.
Factory Preset:
2 MHz, if no radio standard (None) is selected.
If a radio standard is selected, the default value is defined by the selected standard. This
command, along with commands
[:SENSe]:ACPower:OFFSet:LIST[:FREQuency] and
[:SENSe]:ACPower:OFFSet:LIST:STATe are used to set an entire array of
values. The following table shows the default array if no radio standard (None) is selected.
Offset
State
Frequency
Integ. BW
A
ON
3 MHz
2 MHz
B
OFF
0 Hz
2 MHz
C
OFF
0 Hz
2 MHz
D
OFF
0 Hz
2 MHz
E
OFF
0 Hz
2 MHz
F
OFF
0 Hz
2 MHz
Default Terminator:
Range:
Hz
300 Hz to 500 MHz
Remote Command:
[:SENSe]:ACPower:OFFSet:LIST:BANDwidth|BWIDth
[:INTegration] <bw>,<bw>,<bw>,<bw>,<bw>,<bw>
[:SENSe]:ACPower:OFFSet:LIST:BANDwidth|BWIDth
[:INTegration]?
Remote Command Notes: If a radio standard is selected, the default value is defined by
the selected standard. This command, along with commands
[:SENSe]:ACPower:OFFSet:LIST[:FREQuency] and
[:SENSe]:ACPower:OFFSet:LIST:STATe are used to set an entire array of
values. The following table shows the default array if no radio standard (None) is selected.
Offset
State
Frequency
Integ. BW
A
ON
3 MHz
2 MHz
Agilent N8201A Performance Downconverter Synthetic Instrument Module, 250 kHz to 26.5 GHz
293