Download Agilent Technologies N8201A Technical data
Transcript
Measurement Setup 15 Ref BW Sets the reference bandwidth (integration bandwidth) for each offset. Key Path: Meas Setup, Offset Setup State Saved: Saved in Instrument State. Factory Preset: 2 MHz, if no radio standard (None) is selected. If a radio standard is selected, the default value is defined by the selected standard. This command, along with commands [:SENSe]:ACPower:OFFSet:LIST[:FREQuency] and [:SENSe]:ACPower:OFFSet:LIST:STATe are used to set an entire array of values. The following table shows the default array if no radio standard (None) is selected. Offset State Frequency Integ. BW A ON 3 MHz 2 MHz B OFF 0 Hz 2 MHz C OFF 0 Hz 2 MHz D OFF 0 Hz 2 MHz E OFF 0 Hz 2 MHz F OFF 0 Hz 2 MHz Default Terminator: Range: Hz 300 Hz to 500 MHz Remote Command: [:SENSe]:ACPower:OFFSet:LIST:BANDwidth|BWIDth [:INTegration] <bw>,<bw>,<bw>,<bw>,<bw>,<bw> [:SENSe]:ACPower:OFFSet:LIST:BANDwidth|BWIDth [:INTegration]? Remote Command Notes: If a radio standard is selected, the default value is defined by the selected standard. This command, along with commands [:SENSe]:ACPower:OFFSet:LIST[:FREQuency] and [:SENSe]:ACPower:OFFSet:LIST:STATe are used to set an entire array of values. The following table shows the default array if no radio standard (None) is selected. Offset State Frequency Integ. BW A ON 3 MHz 2 MHz Agilent N8201A Performance Downconverter Synthetic Instrument Module, 250 kHz to 26.5 GHz 293
Related documents
Agilent Technologies E4440
Agilent Technologies N8201A User`s guide
Agilent Technologies N8201A Technical data
User`s/Programmer`s Reference Volume 1, Core
Agilent Technologies N9320A Technical data
Agilent Technologies E4406A VSA Satellite Radio User Manual
User`s Guide
U3700 Series User's Guide
Agilent Technologies E4406A Satellite Radio User Manual
User's Guide DSA800 Series Spectrum Analyzer
User manuals
User`s Guide DSA800 Series Spectrum Analyzer