Download ADEMCO Alpha Vista Console Programming instructions

A system-wide
LCD display.
this zone will be allowed to
one armed interval. Restorals
for a time greater than its
second) .
programmed number of alarm reports for
be transmitted (swinger suppression) in
will be sent when the zone is restored
physical response time (less than 1
“ During the disarmed state, a faulted zone will result in a “DISARMED—
Press * to show faults” display (5137) or a NOT READY display (4137).
Subsequent depression of the * key will cause all the descriptors
andlor numbers of the faulted zones to te sequentially displayed. No
communicator reports will be initiated.
&pe
3.
BURGLARY PERIMETER:
While the System is armed, a faulted zone will
initiate an alarm at the console, and an external alarm and a latched
LCD display will be present; in addition, a programmed canmunicator
report will be transmitted. Depression of any key will silence the
Console’s local alarm sounder for 10 seconds. A system-wide programmed
number of alarm reports
for this zone will be allowed
to be
transmitted (swinger suppression) by the canmunicator in one armed
period. The communicator will transmit a restord
message when the
zone is restored for a time greater than its physical response time
(less than 1 second).
During the disarmed state, a faulted zone will result in a “DlSARMEDPress * to show faults” display (5137) or a NOT READY display (4137).
Subsequent depression of the * key will cause all the descriptors
and/or numbers of the faulted zones to be sequentially displayed. No
communicator reports will be initiated.
Type 4. BURGLARY INTERIOR, FOLL(MER:
This zone will always have Exit Delay
by a fault in an
#1. The zone has an Entry Delay if preceded
Entry/Exit zone (type #1 or #2).
If not preceded by an Entry/Exit
zone fault, an immediate audible local (console) and external alarm,
latched display, and a programmed caumunicator report are initiated.
Depressing any key at the Console will silence the Console sounder for
A system-wide programmed number of alarm reports for
10 seconds.
this zone will be allowed to be transmitted (swinger suppression) by
the canmunicator in one armed period. The canmunicator will transmit a
restoral message when the zone is restored for a time greater than its
physical response time (less than 1 second).
During the disarmed state, a faulted zone will result in a “DISARMED—
Press * to show faults” display (5137) or a NOT READY (display (4137).
Subsequent depression of the * key will cause all the descriptors
and/or numbers of the faulted zones to be sequentially displayed. NO
communicator reports will be initiated.
Type 5.
BURGLARY PERIMETER, TROUBLE BY DAY/ALARM BY NIGNT: During the disarmed
state (day), faulting the zone will initiate a “troublertdisplay and a
latched sounder (beeping). The console will beep rapidly along with a
latched display of the faulted zone and the word CHECK. Pressing any
key will silence the beeping for 10 seconds. Keying the security code
+ OFF will silence the beeping, but will not clear the display of any
faulted zone until the fault condition is remwed.
Each trouble can restilt in a ‘~troublerlreport (if programmed).
A
trouble restoral message will be sent as each zone is restored to
normal condition. The maximum nunber of trouble reports per armed
period will be limited by the system-wide programmed number of alarm
reports option (swinger suppression).
7