Download ASCOM D62 - User manual

User Manual
Ascom d62 DECT Handset
3.1
TD 92477GB
12
Space
To add space between text
13
Sound off key
To turn on/off audible signals in idle mode, silencing the ring signal at incoming
call, and to turn on/off the microphone during a call.
14
Tactile indicators
There are two tactile indicators to indicate the centre of the key pad
15
End and On/Off key
Combined button; to end a call, to return to standby mode, and to switch the
handset on/off by long press.
16
Colour display
The full graphic type display is 128 pixels wide and 160 pixels high. The display
has multiple colours and backlighting.
17
Headset connector
The headset connector is for connecting a headset. The connector is protected
against dust by using the headset connector cover.
18
LED
Indicates incoming call, messaging, low battery, and charging.
The Ascom d62 DECT Handset
IMPORTANT: The handset may retain small magnetic objects around the mouthcap or
earcap region.
Case
The plastic cover parts are made of durable PC/ABS material.
Antenna
The antenna is integrated inside the handset.
Loudspeaker
The handset has a separate loudspeaker for the loudspeaking function. It is placed on the
back side of the handset.
Microphone
The microphone is placed on the front bottom side of the handset.
Clip
There are two different belt clip options to the handset; a hinge-type clip (standard), and a
swivel-type clip. See 14.3 Attach the Hinge-type Clip on page 72, or 14.4 Attach the
Swivel-type Clip on page 73. Use the clip to attach the handset to a pocket, belt, or similar.
It is also possible to use the handset without any clip on, see 14.5 Attach Cover for No Clip
on page 73.
Battery
The battery is a rechargeable Li-pol battery, placed under a battery cover. See 14.1.4
Replace the Battery on page 69.
2009-12-08/ Ver. C
8