Download Savin SDC306 Operating instructions

Transcript
Installation and Operating Instructions
Information
I
Current collector temperature (E1)
Minimum collector temperature (E1)
Maximum collector temperature (E1)
Current storage cylinder temperature at
bottom (E2)
Minimum storage cylinder temperature at
bottom (E2)
Maximum storage cylinder temperature at
bottom (E2)
Current storage cylinder temperature at top
(E4)
Minimum storage cylinder temperature at
top (E4)
Maximum storage cylinder temperature at
top (E4)
Current temperature of thermal transfer
storage cylinder at centre (E3)
Minimum temperature of thermal transfer
storage cylinder at centre (E3)
Minimum temperature of thermal transfer
storage cylinder at centre (E3)
Current return line temperature (E5)
Minimum return line temperature (E5)
Maximum return line temperature (E5)
Flow rate ∗
Daily yield ∗
Total yield ∗
Program
I
Timeframe R2 start
Timeframe R2 stop
Maximum temperature of
storage cylinder
Solar circuit Td start
Solar circuit Td stop
Manual operation
I
Pump A1 off/on
A2 off/on
A3 off/on
A4 off/on
Basic setting
I
Code entry
Reset/factory setting
Select basic
configuration
Maximum collector
temperature
Mode yield metering
Max temp. of transfer
storage cylinder
R2 Td start
Volume flow ∗
R2 Td stop
Glycol type ∗
R3 Td start
Glycol percentage ∗
R3 Td stop
Code change
DFG/WMM ∗∗
Set time
∗ Displayed only if yield metering is active.
∗∗ Displayed only if yield metering mode is equivalent to 2.
SDC 306
1316BED036-11B-E
- 51 -
Date 06/09