Download Minolta Di650 Service manual

ADJUSTMENT
NO
92
Maximum
count
Item
Set quantity 11 or more
Energized time of power condition 1
2 ADJUSTMENT
93
Energized time of power condition 2
94
95 Unused
Energized time of power condition 4
96
Time during low power mode
97
Time during WUP
98
Time during front door open
99999999
99
100
101
102
Ope. time in 1 side straight exit
Ope. time in 1 side reverse exit
Ope. time in 2 side print
Operation time in ADF mode
103
Morning Correction count
104
Time during APS sensor on
105
106
107
108
109
110
Counting condition
All counters are 8-digit
counters.
Total period of time during
which image control board
is energized. Total period
of time during the operation of CPU.
Total period of time during
which remote power supply 2 is on.
1 is counted per minutes.
N of main tray used jobs
N of sub tray used jobs
N of stapling folding used jobs
N of folding jobs
N of ADF NF occurred
Total period of time during
which remote power supply 3 is on.
1 is counted per minutes.
Total period of time during
which low power mode is
selected. The count is
incremented by 1 per
minute.
Total period of time during
which fixing unit heater is
ON when the fixing is
UNREADY. The count is
incremented by 1 per second. Data is output per
minute.
Total period of time during
which front door is open.
The count is incremented
by 1 per second. Data is
output per minute.
Total time from start to end
of printing. The count is
incremented by 1 per second. Data is output per
minute. (Halt time caused
by JAM stop, etc. is not
included.)
Total operation time of
ADF. The count is incremented by 1 per second.
Data is output per minute.
The count is incremented
by 1 each time correction
is made before starting
work in the morning.
Total period of time during
which APS sensor is ON.
The count is incremented
by 1 per second. Data is
output per minute.
Number of jobs
2-32