Download Motorola CPCI-6115 Technical data

MOTLoad Firmware
Table 5-1 MOTLoad Commands (continued)
Command
Description
vmeCfg
Manages user specified VME configuration parameters
vpdDisplay
VPD Display
vpdEdit
VPD Edit
waitProbe
Wait for I/O Probe to Complete
Note:
Due to the difference in endianness of the board, the sromWrite command automatically
swaps bytes as these are written into memory. The sromRead command accesses the actual
memory contents and does not swap bytes as it reads. Therefore, the memory that is read
through sromRead will look different from the source used by sromWrite.
For example, if the data being written start with this sequence:
15 16 1E 00 10 B5 65 40
00 CB 06 04 40 01 06 09
Then, the data retrieved through the sromRead command will appear as:
16 15 00 1E B5 10 40 65
CB 00 04 06 01 40 09 06
This behavior is normal for these commands on the CPCI-6200.
CPCI-6200 Installation and Use (6806800J66C)
105