Download Crestron 2.5 Installation guide

Transcript
FlipTop Control Center with Cresnet®
Crestron C2N-FTB
FlipTop Control Center
with Cresnet®: C2N-FTB
Introduction
Features and Functions
The C2N-FTB-B and the C2N-FTB-BALUM are Crestron® keypad devices that
provide a stylish flush-mount tabletop interface and control solution. The fliptop
compartment provides organized storage for a variety of pullout computer,
communication, and A/V cables, which stow neatly out of sight within the
fliptop compartment when not in use. The keypad provides A/V, lighting, and
other functional controls via Cresnet®.
The suffix ‘-B’, and ‘-BALUM’, respectively denotes color, e.g., C2N-FTB-B is
a black unit, and C2N-FTB-BALUM has a brushed aluminum finish. For
simplicity within this guide, color suffix is omitted and the designation
C2N-FTB is used except where noted.
Functional Summary
•
Built-in engravable* keypad with 10 to 20 buttons with LEDs
•
One AC power passthrough connector
•
Two Cresnet ports (on the bottom side)
•
Cable support plate (included)
* As an option, custom-engraved buttons can be designed and obtained by using the
Crestron Engraver software. They are available from the Crestron website.
Operations & Installation Guide – DOC. 6338 FlipTop Control Center with Cresnet®: C2N-FTB • 1