Download Conair 7 User guide

Transcript
Structure and Function
TrueBlend™
Pos 1 & 2, Main components
Pos 3 & 6, Main or additive
components
Pos 4 & 5, Additive components
6 position
Position 1
Position 2
Position 3
Position 6
Controller location
Position 5
Position 4
Front door – (mix chamber)
Fig.10; Layout of six component material
hoppers
All the following six component blenders utilize fixed hopper positions:
5.4
Model
Pos 1 & 2
Pos 3 & 4
Pos 5 & 6
TB250-6
Fixed
Fixed
Fixed
TB500-6
Fixed
Fixed
Fixed
TB900-6
Fixed
Fixed
Fixed
TB1800-5/6
Fixed
Fixed
Fixed
TB2500-5/6
Fixed
Fixed
Fixed
TB3500-5/6
Fixed
Fixed
Fixed
Operating modes
The TrueBlend operates in three different operating modes:
• Gravimetric mode: all components are metered and weighed in sequence.
• Volumetric mode: all components are metered in sequence without weighing.
• Combined mode: a gravimetric cycle is followed by an adjustable number
of volumetric cycles.
40
Edition: February 2008