Download Wascomat EXSM 230 S Operating instructions

Mechanical and electrical design
14
General
The door and the electronic timer with display and keyboard are fitted at the front of the
machine.
All control and indicating components, i.e. relays, delay unit, etc are assembled under the
top cover, easily accessible from the top of the machine for simplified servicing.
Main units
Fig.
28
1 Electronic timer with display and keyboard for operating the machine.
2 Door -with automatic locking device which remains locked throughout the different wash
processes.
3 Detergent supply box - three compartments for automatic injection of powered
detergents and fabric softener.
4 Inner cylinder - of stainless steel supported at the rear by two ballraces.
5 Outer drum - of stainless teel (18/8) securely attached to the frame.
6 Motor - for reversing wash action, distribution and for high speed spin action.
7 Hot and cold water valves - program and level controlled solenoid valves for filling with
water, and for flushdown of automatic detergent dispenser.
8 Drain valve - timer controlled valve for draining the machine of water.
9 Siphon breaker - to prevent water in the machine from re-entering the water supply
system.
10 Control circuit - of plug in type, for time and temperature control of the different wash
cycles.
28
2515