Download Seagate ST3636A Specifications
Transcript
20 ATA Interface Reference Manual, Rev. C 4.10 Features register CS1FX– = 1 DA2 = 0 CS3FX– = 0 DA1 = 0 DA0 = 1 Mode = Write Only PC-AT I/O port address: 1F1H This register is used by the Set Features command to enable and disable special options, as defined in Section 5.4.14 (The Set Features command). 4.11 Sector Count register CS1FX– = 1 DA2 = 0 CS3FX– = 0 DA1 = 1 DA0 = 0 Mode = Read/Write PC-AT I/O port address: 1F2H This register specifies the number of sectors of data to be transferred during read/write sector commands. The value contained in the register is decremented every time a sector is transferred. A value of zero specifies 256 sectors. When executing the Initialize Drive Parameters or Format commands, this register defines the number of sectors per track. This register is used by the power mode commands to set timers. 4.12 Sector Number register CS1FX– = 1 DA2 = 0 CS3FX– = 0 DA1 = 1 DA0 = 1 Mode = Read/Write PC-AT I/O port address: 1F3H This register contains the starting sector number for any disc access. At the completion of a command, this register is updated to reflect the last sector transferred correctly, or the sector on which an error occurred. The sectors are numbered sequentially, starting with 1. With logical block addressing, this register contains bits 7 through 0 of the logical block address (LBA).